MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

Ducati Supersport R Concept by Oberdan Bezzi

03/30/2018 @ 11:57 am, by Jensen BeelerADD COMMENTS

When we first heard that Ducati was bringing back the Supersport line, we were excited. The original SuperSport wasn’t exactly the best selling model for the Italian brand, but Ducati created some loyal enthusiasts with the half-faired sport-touring machine.

The new Ducati Supersport does a good job of tapping into the ethos of the old model, but visually it draws too close to the Ducati 1299 Panigale Superbike, rather than the lines of yore.

Here, Oberdan Bezzi plays another one of his “what if” games, drawing an air-cooled Supersport model (based off the current Scrambler platform), complete with the more classic half-fairing design. 

Continue Reading

Vyrus 984 Ultimate Edition

11/20/2012 @ 8:14 am, by Jensen Beeler12 COMMENTS

Technically very similar to the Bimota Tesi 3D (there’s a reason for that), the Vyrus 984 C3 2V is that other hub-center steering motorcycle from Italy. Featuring a 992cc Ducati DesmoDue motor at its core, the Vyrus 984 is about as radical as it gets when it comes to modern motorcycles. Upping the ante another notch though is the Vyrus 984 Ultimate Edition, which takes the already light 984 machine, and drops its weight to 144kg (317 lbs) dry.

Helping Vyrus achieve that ludicrous figure is the company’s copious usage of carbon fiber on the Vyrus 984 Ultimate Edition, which drops over 10 lbs from the original design. A large part of this weight savings is the front portion of the machine, which like the Ducati 1199 Panigale, builds directly off the engine cylinder heads, and serves double-duty as the motorcycle’s airbox.

Other goodies include carbon disc brakes, Öhlins TTX shocks for suspension, magnesium case covers, and an upside down aluminum box frame swingarm. Designed with the track in mind, the Vyrus 984 Ultimate Edition also comes with traction control and a full data-logging system. Price? Let’s just say it’s six figures. Expect a water-cooled Vyrus 985 Ultimate Edition to follow shortly.

Continue Reading

The big news from Ducati at EICMA has to be the debut of the 2013 Ducati Hypermotard and its more touring focus sibling the 2013 Ducati Hyperstrada. Trading in their two-valve air-cooled lumps for a 110hp 821cc liquid-cooled v-twin engine, we are sure there are some Ducatisti who had there cooling fins ruffled by that move. Never fear, Bimota is here.

Using Ducati 95hp 1,078cc air-cooled engine that was in the original Ducati Hypermotard 1100, the Bimota DB10 debuted last year as a tasteful alternative to the maxi-motard from Bologna. Back again this year, Bimota has up-spec’d the DB10, with the 2013 Bimota DB10R coming with a bevy of more carbon fiber goodness.

Continue Reading

Ducati 798 Desmosport R Concept by Oberdan Bezzi

03/22/2012 @ 5:19 pm, by Jensen Beeler13 COMMENTS

Much has been speculated about the alleged Ducati 799 Superbike that surely is being planned in Borgo Panigale this very minute. Connecting the dots with the Italian company’s product roadmap, Ducati surely has a smaller-displacement version of its 1199 Panigale in the works, though what it will be called and what displacement it will use is still the subject of much conjecture. Today Oberdan Bezzi takes us back down that thought process with his Ducati 798 Desmosport R concept.

A supersport-market model, Bezzi’s focus is not with the water-cooled 1,200cc Superquadro motor, but the tried and true DesmoDue air-cooled lump currently found in the Hypermotard and Monster lines. Looking for a €9,000 price point, 100hp power figure, and 365 lbs dry weight, Oberdan Bezzi is striking the same vein that Radical Ducati and NCR have been touching on for the past few years, albeit at different ends of the price spectrum.

Continue Reading

Noticeably absent from Ducati’s 2011 line-up is the Ducati GT1000, the last remaining SportClassic in the Ducati line. The move isn’t surprising to Ducatisti, who have seen the writing on the wall for the retro-classic for some time now. Using an obsolete air-cooled 992cc lump, the SportClassic line stuck out like a sore thumb in the Ducati supply chain, as the brand has continued to center itself around a small core of power plants for its different motorcycles. With no other current models sharing the older DesmoDue engine, and sales likely continuing to decline, Ducati has taken the the GT1000 out the barnyard door and put the beast out of its misery.

Continue Reading