Despite what you read elsewhere, the 2019 Honda CBR600RR remains unchanged for the American market. But will happen next year?
If you read publications from our colleagues in Europe, then you will know that Honda must surely have plans for a new CBR600RR for the 2019 model year. The proof that they offer is that the recent CARB filings by American Honda show a CBR with a significant weight drop for next year.
First spotted by our friends at Nieuwsmotor, the CARB filings quote a 10kg (22 lbs) weight difference between the listed Honda “CBR600RA” and Honda “CBR600RR” motorcycles, which makes it seem like a lighter and more focused supersport is on the way.
It is an interesting dream – and a funny one for European journalists to spot, since the CBR600 series is all but dead in Europe. But what is the reality of this discovery?
British magazines MCN dropped a bombshell on the motorcycle world today, reporting that Honda was set to discontinue the Honda CBR600RR, with no supersport replacement in sight. According to their reports, the main impetus for the Honda CBR600RR being discontinued is the Euro 4 emission standards, which the Honda CBR600RR does not meet. Honda feels too that the demand for a 600cc sport bike is too low to warrant updating the CBR600RR to meet Euro 4 regulations, let alone building an all-new machine for the market that would be Euro 4 compliant.
American fans will have a lot of reasons to follow the World Superbike championship next year.
After Nicky Hayden confirmed that he will be switching to WSBK with the Ten Kate Honda for 2016 and 2017, today, confirmation came that PJ Jacobsen is to remain in World Supersport for next year to take another shot at the championship.
The American is to stay with his current Core Motorsport Thailand team, riding a Honda CBR600RR. Both the team and the bike will get a major boost next year, however, as Ten Kate Honda have announced they will be partnering with the team in 2016.
The era of Honda’s monopoly in Moto2 could be drawing to an end. Today, the FIM announced that they were putting the engine supply for Moto2 out to tender, and asking for proposals from potential engine suppliers.
The Moto2 class is to remain a single make engine class though, with engines managed and supplied by the series organizer.
The announcement comes as a result of Honda’s CBR600 powerplant, which has powered the Moto2 bikes since the inception of the class, reaches the end of its service life.
The engines are virtually unchanged since their introduction in 2010, and Honda cannot guarantee the supply of spares for the engines beyond the current contract, which ends after the 2018 season. A replacement will be needed, whether it comes from Honda or from another manufacturer.
For SpeedWeek 2013, Shunji Yokokawa set out on a journey to set a land speed record at the Bonneville Salt Flats, but what he had not anticipated were the challenges that lay ahead. Yokokawa had always dreamed of riding on the salt flats, but it was not until 2013 as Assistant Chief Engineer for Honda Japan, that he was afforded the opportunity to fulfill his dream, which he describes as “gliding” across the flats. Assisted by a 2-man crew, Yokokawa traveled to Utah with a bone-stock 2013 Honda CBR600RR in hopes of adding yet another record to one of the many that Honda holds. The CBR was set up specifically with one goal in mind: to break a land speed record with a production class motorcycle, but as Yokokawa and his team wuold find out, there is a reason why so many fail.
Judging by the temperature emanating from the Asphalt & Rubber server hard drives, the 2013 Honda CBR600RR caused quite a stir today when it broke cover ahead of the EICMA motorcycle show in Milan, Italy. Unfortunately at the time of our coverage, we only had a few side-profile photos to share with you, which really didn’t do any justice to the bike’s visual redesign efforts. That is about to change though, as we have a few more shots, which most importantly give a good look at the Honda CBR600RR’s new mug. A more aerodynamic bodywork package (the new fairings have a 6% air-flow factor), Honda’s new RAM-air intake on the CBR600RR also helps put a little more pep in the supersport’s step.
It is hard to believe that the Honda CBR600RR will turn five-years-old in 2013, but the Japanese supersport has long been neglected in the Honda line-up. Actually, the phonomenon has not been limited to the 600cc sport bike, as the Honda CBR1000RR has also been left to whither in the sun for far too long. With the 1,000cc superbike getting a makeover for 2012, it looks like the CBR600RR is finally getting its turn, as well. As such, the 2013 Honda CBR600RR gets a set of new fairings, which we must admit are rather fetching (the bodywork is good for a 6% reduction in drag, according to Honda). The Japanese company also says that the revised front section improves RAM-air, and thus midrange torque. We won’t being to tell you what’s wrong with that statement.
When Honda showed off its new “Leyla” paint scheme for the new middle weight CBR600RR, the name had us a little confused, but the sometimes clever folks at MCN have spotted what many in the industry (including us) missed. That black & white camo-eque paint job is in fact a woman…moaning in delight…we think her name is Leyla. Take a second look, and you’ll see it.
At Jerez this weekend, the Permanent Bureau (FIM & Dorna) was light on the details when it . However after the announcement, Shuhei Nakamoto, VP of HRC, revealed more information about the engine that will be used in Moto2.