Owners of a 2017 Honda CBR1000RR, or its up-spec sibling the 2017 Honda CBR1000RR SP, should take note, as American Honda is recalling 2,443 units of the superbike for issues with their fuel tank design.
This is because on affected units there may be a gap between the fuel tank cap seal and the fuel filler neck, which could allow water to enter the fuel tank.
Crashing during the superbike practice at the North West 200 on Thursday, John McGuinness was reported to have suffered a broken right leg. But now getting an update on his condition, we can see that his injuries are far worse than was initially thought.
While Honda Racing has withdrawn from the rest of superstock and superbike races at the North West 200, because of concerns regarding a mechanical issue causing the McGuinness’ crash, these injuries also cast significant doubt over John McGuinness competing in this year’s Isle of Man TT.
Nicky Hayden and Stefan Bradl had their first experience of the all new for 2017 Honda CBR1000RR SP2 on the opening day of the Jerez test, and it was clear that there is still plenty of work to be done by the Ten Kate squad to get the bikes ready for the start of the season.
With the Phillip Island opener only four weeks away, the Dutch team faces a race against time to be up to speed for the start of the WorldSBK campaign. Both riders made it clear that it is very early days for the project, and as a result were unwilling to offer definitive opinions – though initial impressions were positive.
*It should be noted that after the publication of this article, American Honda adjusted the price on the 2017 Honda CBR1000RR to an MSRP of $16,499. American Honda has since also announced pricing on the 2017 Honda CBR1000RR ABS, set at $16,799 MSRP.
I’m not sure if I missed the memo, or if Honda just didn’t make much of a fuss about it, but pricing for the 2017 Honda CBR1000RR and its kin are now showing on the American Honda website.
Prices for the new Honda CBR1000RR seems to be only available in the USA right now, but early indications appear that Big Red is asking for quite the pretty penny for its freshly updated superbike.
As such, current pricing is as follows: Honda CBR1000RR – $16,999; Honda CBR1000RR ABS – TBD; Honda CBR1000RR SP – $19,999; Honda CBR1000RR SP2 – $24,999.
When it came time to unveil its new revised superbike, Honda wisely debuted its premium and homologation models first, at October’s INTERMOT show in Cologne, Germany.
With EICMA now here, we can finally see the bike that most enthusiasts will find in their garage, the base model 2017 Honda CBR1000RR.
So as expected, the base model 2017 Honda CBR1000RR uses lower-spec suspension and braking components than its SP sibling, but thankfully it retains all of the other engine, chassis, and electronic upgrades that we have already seen.
This includes the CBR1000RR’s new magnesium casings, titanium fuel tank, five-spoke wheels, and internal engine modifications. In total, this means that the 2017 Honda CBR1000RR makes 190hp and weighs 432 lbs at the curb.
As for the changes, suspension is handled by Showa 43mm large-volume BPF forks at the front, and with the Show Balance Free Rear Cushion (BFRC) shock in the rear, while braking is done by four-piston Tokico calipers up front, as well.
The 2017 Honda CBR1000RR was easily one of the most talked about machines at the 2016 INTERMOT show in Cologne, Germany.
The new CBR1000RR is still the same platform that we have seen from previous model years, though it is also a big step for Honda, keeping the Japanese motorcycle manufacturer relevant in the superbike segment.
This mixture of old and new has certainly lead to some intrigue from the sport bike community, so in effort to answer some of the questions posed by our readers, we reached out to American Honda for some answers.
If the 2017 Honda CBR1000RR SP is a little out your superbike budget, with its roughly $20,000 price tag (actual MSRP to be confirmed soon), then you will be happy to hear that a base model version of the updated CBR1000RR will be debuting at the upcoming EICMA show in November.
There is no word on the base model Honda CBR1000RR beyond the bike’s debut, at this moment, though we can make some guesses about what to expect from Big Red in Milan, based off what we’ve seen with SP and SP2 models.
The wait is over. The most anticipated motorcycle of the INTERMOT show is here, the 2017 Honda CBR1000RR SP.
We have seen the spy photos of this new superbike, we have seen leaked details on this superbike, and we’ve mused endlessly about this new superbike. And now, we can finally replace that conjecture with fact.
First off, the rumors were true. The 2017 Honda CBR1000RR SP sheds a massive 15 kilograms off its bulk, which translates into a 441 lbs mass at the curb. Power has also been increased by almost 11hp, for a total of 190hp at the crank.
Honda says that these two figures combined mean a 14% increase in the Honda CBR1000RR’s power-to-weight ratio. That’s pretty astounding, when you consider that under the new fairings is still mostly last year’s bike.
Our colleagues at NieuwsMotor have been up to their usual trade show tricks today, and seemingly they have gotten ahold ofthe technical specs for the 2017 Honda CBR1000RR.
They are reporting that the venerable superbike will get an increase of roughly 10hp, along with a diet of 33 lbs (15kg). Other features include Öhlins semi-active suspension, different riding modes (likely via ride-by-wire), and traction control (HSTC – Honda Select Torque Control).
The new Honda CBR1000RR is of course Euro4 compliant, and Honda is apparently touting that 90% of the machine has been redesigned for the 2017 model year.
To be certain, out of all the machines set to debut at the INTERMOT show tomorrow, the 2017 Honda CBR1000RR is the one we are looking forward to seeing the most.
After seeing the spy photos of the Honda CBR1000RR filming in Croatia, we already have a pretty good indication that Honda isn’t going to stray too far from the current Fireblade design. The chassis looks almost exactly the same as the current generation model, as does the engine.
The most recent teasers from Honda confirm this notion, with the Japanese brand showing us four glowing header pipes off an inline-four engine. The exhaust note should end speculation that a crossplane crankshaft has been added to the CBR1000RR, with a distinct “screamer” tone coming from its pipes.
Honda’s next video gives indication that the 2017 Honda CBR1000RR will have an LED headlight, a tip to the likely robust electronics suite that Big Red is bringing to its new superbike, which will compliment the major fairing design upgrade
With the tagline “Total Control” being touted by Honda, we can expect the 2017 Honda CBR1000RR to come with the bevy of electronic rider aids that we have come to expect from this segment: ride-by-wire, traction control, wheelie control, launch control, etc.
I’m not going to lie to you, Episode 33 of the Two Enthusiasts Podcast starts off a little rowdy, and never really stops partying. In it, we look at the recently spied 2017 Honda CBR1000RR and recently teased 2017 Yamaha YZF-R6, two incredibly important machines in the sport biking side of the industry.
We also talk about the Wazer water jet cutting project, and how that’s going to affect builders and makers. From there, we pivot to a discussion on the consumerization (that’s a word now) of high-tech manufacturing techniques, which has made things like water jet cutting and rapid prototyping accessible to the masses.
The show ends with a listener question about ABS brakes, which is good timing, considering our interesting discussion about electronics as a whole, and the progression of rider aids in the motorcycle industry. Wankel jokes aside, it is a pretty interesting, and dare we say entertaining show.
As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!