Tag

2016 Honda RC213V-S

Browsing

Whatever your thoughts are on the Honda RC213V-S, you have to appreciate the engineering and craftsmanship that goes into the $184,000 MotoGP bike with lights.

With just over 200 units being made, Honda had little incentive to design the RC213V-S for mass production, opting instead to make each unit by hand, with a small team of highly skilled builders.

There is something about that process that gets lost in description, so we are fortunate that Honda Hong Kong released a video (after the jump) that shows the Honda RC213V-S build team hard at work.

A couple mech-geek things of note: at 1:32, the jig used to bring the chassis pieces together for welding; at 1:50, the one-off shaping of the sheet metal for the headstock; at 2:12, how virtually ever metal piece is hand-welded. There is plenty here to geek-out over, enjoy!

Look at the smile on this guy’s face! That’s the smile of the first person on planet Earth to take deliver of their new Honda RC213V-S street bike.

The first example of the €188,000 “MotoGP bike with lights” goes to Mr. John Brown, a Brit who owns and runs a Honda motorcycle dealership in Manchester, and is also an avid collector of Honda motorcycles.

Honda says that other customers will begin to take receipt of their RC213V-S motorcycles after the New Year.

Do you want a MotoGP bike in your garage (or living room, as the case will likely be)? Do you have $184,000 and then some, burning a hole in your pocket? Do you like not living in a house, but think carbon fiber fairings will keep you warm at night?

If you said yes to any of those questions, you should buy a Honda RC213V-S.

In seriousness, if owning a Honda RC213V-S is a notion that does strike you, then you better hurry up with your order. This is because we asked Honda how orders were coming with the RC213V-S, and the Japanese brand responded that reservations for the MotoGP-bike-for-the-street are quite abundant, indeed.

Honda has finally debuted its “absolute MotoGP machine for the street” – the highly anticipated and hyped Honda RC213V-S. First off, the rumors are true: this is not going to be an affordable motorcycle.

The 2016 Honda RC213V-S will cost $184,000 in the USA, while Europeans will get stuck with a €188,ooo sticker price (¥21,900,000 in Japan & $244,000 in Australia). In order to buy an RC213V-S, customers must register on a special website, which will open on July 16th.

Each RC213V-S street bike will be hand-built at Honda’s Kumamoto factory, at the pace of roughly one motorcycle per day. For those inclined to doing the math, we’ll save you the trouble…fewer than 300 units will be made, with that number likely closer to 200.

The 2016 Honda RC213V-S will be available in two colors: the HRC Tricolor or plain-jane carbon fiber (our pick). Both colors have carbon fiber fairings, and come with coil spring valves (not pneumatic valves, like on the race bikes). Other changes from the racing machines include the gearbox, tires, brakes, and maximum steering angle.

As far as electronics go, there are five rider modes, a sophisticated traction control system, along with engine braking control, a quickshifter, and an inertial measurement unit (IMU).

Honda says that the RC213V-S tips the scales at a claimed 170kg dry weight (188kg wet in Europe, 190kg wet in the USA), which isn’t exactly mind-blowingly light. For example, the Ducati 1199 Superleggera weighs 155kg dry and 178kg wet.

For track riders, there is a “sport kit” that will bring the bike to even closer spec to the racing machines. It includes a new ECU, revised ram-air tubes, and of course a racing exhaust system. This kit drops the dry weight to 165kg (177kg wet), but it oddly won’t be available to USA market machines…and that’s an important fact to remember.

In the US market, the Honda RC213V-S will be tuned for 101hp at 8,000 rpm (66 lbs•ft of torque) — a figure the bike will be stuck at, since the sport kit is not available to the US market.

In Europe and Australia, the RC213V-S will make a still disappointing 157hp at the 11,000 rpm-spinning crank, but with the sports kit installed, that figure will get bumped to over 210hp at 13,000 rpm. Peak torque is set at 75 lbs•ft at 10,500 rpm, with the sports kit lifting that figure to over 87 lbs•ft.

The final production version of the Honda RC213V-S is set to debut in less than 24 hours, at a special press event at the Catalan GP. In case you happen not to be in the Barcelona area tomorrow, Honda has set up a live feed of the event (after the jump).

Still playing coy, all that Honda will say is that the launch will be “the absolute MotoGP machine for the street” – though, it is perhaps the worst kept secret in the motorcycle industry.

Casey Stoner is expected to be on-hand as well, giving the Catalans the treat of a parade lap on the €100,000+ Honda RC213V-S.

We’ll have photos and all the details for you once the Honda RC213V-S debuts, so check back tomorrow at 2am Pacific Time, 5am Eastern Time.

French-speaking publications are letting slip that Honda has a media event planned June 11th for the Honda RC213V-S — where it is expected that the MotoGP-derived street bike will be finally put forth in its production form.

Readers will remember that Honda unveiled the RC213V-S as a “prototype” at the 2014 EICMA show. Honda made the same move with the “True Adventure” prototype, which we knew at the time to be the new Honda Africa Twin adventure-touring machine.

With the Africa Twin now officially a 2016 model according to Honda, we wait for Big Red to do the same with the RC213V-S.