Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

Kawasaki to Release a Single-Cylinder 250cc Sport Bike?

01/06/2014 @ 11:33 am, by Bryan Delohery4 COMMENTS

Kawasaki to Release a Single Cylinder 250cc Sport Bike? kawasaki 250cc single cylinder

According to TMCBlog (more photos on their site), Kawasaki may be planning to release a new entry level sport bike as a cost effective option for the Southeast Asian market. Rumor has it that this 250cc, single-cylinder bike is under construction and would be the more economical cousin to the Kawasaki Ninja 300 and its parallel-twin engine, while providing more competition for the Honda CBR250R.

While none of this can be confirmed, for time being it is a safe bet that if Kawasaki wants to remain competitive in its Asian markets, and it would be a good business strategy for Kawasaki to produce a bike that is comparable to many of the other single-cylinder bikes in the region, which are being produced by Honda, Suzuki, and KTM.

Triumph Distributor Confirms 250cc Model for Asia

01/08/2013 @ 2:29 pm, by Jensen Beeler6 COMMENTS

Triumph Distributor Confirms 250cc Model for Asia Triumph 250cc sketch

Shedding more insight on our previous news that Triumph is working on a small-displacement model for India and Southeast Asia, we now get more details on the project from the British company’s distributor in Indonesia, Rudhy Siswanto of PT Global Motorcycle Trading.

Expected to be a 250cc twin-cylinder machine that will play heavily on the styling cues of the Triumph Street Triple, the new model will begin production in 2014 at Triumph’s planned new plant in Narasapur, India, and go head-to-head with the KTM 200 Duke.

The Killing Season – A Motorbike Trip Through Vietnam

01/01/2013 @ 9:29 am, by Jensen Beeler12 COMMENTS

The Killing Season    A Motorbike Trip Through Vietnam the killing season 635x356

Congratulations and welcome to 2013. We imagine that there are a few of you who aren’t firing on all your cylinders yet today, so we will ease you into a new year of motorcycle news with a nice little video, which was made by the folks at Skateboarder Magazine. No, your hangover is not making you see things, we are in fact talking about skateboarding on a motorcycle site.

You see, there is an interesting intersection between the skateboarding and motorcycle subcultures — something about the desire to go one’s own way, to engage in some activity of questionable safety, and to enjoy life in the present, much to the chagrin of everyone else. The crossover may no be as obvious in practice, but it’s there.

For instance, when Harley-Davidson finally figured out that it needed to start appealing to consumers under the age of 40, the first demographic it targeted (with some success) was the skateboarding crowd. Take a look at some of the earlier Harley-Davidson Forty-Eight ads, and see if you can’t pick up on the LBC living, Airwalk wearing, grinder vibe that’s going on there.

So as we already said, for your viewing pleasure today we have a nicely done video by the folks at Skateboarder Magazine, which covers their motley crew riding and skating through Vietnam. The whole piece is a great example of what it is like to travel in Southeast Asia, and puts a lot in perspective as to just how massive the market is there. The traffic is a bit insane as well, especially for these novice riders.

Harley-Davidson Made-for-India Model by 2014?

12/18/2012 @ 4:47 pm, by Jensen Beeler8 COMMENTS

Harley Davidson Made for India Model by 2014? harley davidson india paint 635x450

According to the folks at Indian auto site Zigwheels, Harley-Davidson is finally ready to get serious about the Indian market, and plans on developing and selling a made-for-India model. The entry-level machine would slot in below the current 883cc Sportsters, and be ground-up manufactured locally in India as well.

Zigwheels goes on to say that its sources peg Harley-Davidson executives from the US and India as meeting with Indian vendors and dealers in order to setup distribution of the new model(s). Expected to debut at the 2014 New Delhi show, the India-specific line will arrive in the 400cc-500cc range, feature a v-twin motor, and cost Rs 3.5 lakh ($6,381).

MotoGP: Two Rounds in Malaysia?

12/05/2012 @ 1:34 pm, by Jensen Beeler12 COMMENTS

MotoGP: Two Rounds in Malaysia? Jorge Lorenzo Yamaha Racing 635x423

According to MCN, Yamaha Racing’s Lin Jarvis is keen for more rounds in the Asian market — he is so keen in fact, that Jarvis has even suggested that s second round be held in Malaysia. With southeast asia proving to be an important market for the big motorcycle OEMs, the idea of doubling up on Malaysia for the MotoGP calendar is certainly not the worst idea ever proposed to Dorna’s Carmelo Ezpeleta.

For Yamaha Racing in particular, a second round in the southeast asian territory would dovetail nicely with the team’s already extensive connection to the region’s markets. While everyone in the paddock would seem to be in agreement on MotoGP’s needs to get out of Europe and into other markets, Jarvis’s request to Ezpeleta is still a tall order, as it is a tough proposition for the MotoGP Championship to double-dip not only a small country, but also the same venue.

No Sub-800cc Motorcycle for India? Why Harley-Davidson Doesn’t Understand Emerging Markets

06/02/2012 @ 7:38 am, by Jensen Beeler24 COMMENTS

No Sub 800cc Motorcycle for India? Why Harley Davidson Doesnt Understand Emerging Markets Harley Davidson board racer

Regular readers of Asphalt & Rubber will have noticed by now that I like to talk about what is going on with motorcycling in emerging markets like India, Southeast Asia, Brazil, etc. The fact of the matter is that it is these markets, not North America or Europe, that are going to serve as the future for the motorcycle industry, and the sooner us westerners get used to that idea, the better. For an industry built around and defined by the rebellious archetypes portrayed by James Dean, Marlon Brando, and Steve McQueen, the reality is that motorcyclists as a whole are conservative by nature, and resistant to change…especially in the United States.

We like our bikes loud, our helmets off, and bikes built by real blue-collar ‘mericans. Our skin prickles at the thought of manufacturing outside the borders of our blessed Union, and every time a company opens a factory in India, Southeast Asia, or South America, we talk about the outsourcing of American labor, the downfall of our economy, or something equally hyperbolic.

This has been the same broken record that has been played for the better part of the past 100 years, and has re-manifests itself each decade to address the next perceived threat to our domestic economy. While there is much to say about the shifting of America’s GDP from manufacturing to service industries, the real germane subject for discussion here centers around the idea that all too often Chicken Little rears his head when an American company opens a factory outside of the United States.

Such is the case with Harley-Davidson, which setup manufacturing in India back in 2011. Contrary to belief that the sky was falling, the Bar & Shield brand was not getting ready to massively outsource its production abroad (though it was heavily re-negotiating with its unionized labor force), but instead very deliberately and wisely chose to bypass India’s extraordinarily high tariffs by building and assembling its Indian market bikes locally. This move allowed Harley-Davidson to competitively and reasonably price its motorcycle in the Indian market, which in turn helped the brand expand its presence in one of the largest motorcycle markets in the world.

While this plan so far has proved to be fruitful for Harley-Davidson, the recent news that Harley Davidson India CEO Anoop Prakash has confirmed that H-D will not be making a sub-800cc bike specifically for the Indian market shows a misstep for Harley-Davidson with its international strategy, especially as it pertains to the major growth markets for motorcycling.

30% of Honda’s Business to Come from India by 2020

05/16/2012 @ 12:56 pm, by Jensen Beeler7 COMMENTS

30% of Hondas Business to Come from India by 2020 india flag overlay

As several of our readers pointed out in the latest financial report from Honda, The United States, and North America as a whole, represent just a very small portion of Big Red’s total volume of motorcycle sales. For Honda’s 2011 fiscal year, North America sold a whopping 1.6% of the company’s total motorcycle inventory, while Asia accounted for nearly 79% of Honda’s total sales.

While Honda and other motorcycle manufacturers certainly makes better margins on the units they sell in North America and in Europe, the volume opportunities abroad in emerging markets are far more lucrative for OEMs.

With 1.2 billion people (17% of the global population) and still growing, India is the shining star in emerging markets, so it should come as no surprise that Honda is forecasting that 30% of its business will come from India by 2020, as the Japanese company further increases its presence in Asian markets.

WSBK Heads to Indonesia for 2013 – India Next on the List

02/22/2012 @ 4:34 pm, by Jensen Beeler7 COMMENTS

WSBK Heads to Indonesia for 2013   India Next on the List Sentul International Circuit grid

It seems sometimes that the title “World Sueprbike” is a bit of a misnomer, as the premier production motorcycle racing championship is hardly a worldly affair at all. With fourteen races on the 2012 World Superbike Championship calendar, WSBK will leave Europe a grand total of two times: once for the season-opener at Phillip Island, and once for the American round at Miller Motorsports Park. Holding the other twelve races on the European continent, World Superbike is really stretching its legs this year by holding a race outside of Moscow, Russia.

Progress will apparently be made to rectify this situation though, as starting in 2013 World Superbike will head to Indonesia with a five year contract (races to be held 2013-2017). Set to either end the 2013 calendar with a race at the Sentul International Circuit, or lump the race at the beginning of the season with Phillip Island, the announcement ends s 15 year draught of WSBK racing in Indonesia. Infront and the FIM clearly must be recognizing that the Southeast Asian country is a hot bed for the motorcycle industry (Jakarta is A&R‘s single-largest city of readership).

Video: Traffic in Ho Chi Minh City

01/11/2012 @ 1:34 pm, by Jensen Beeler7 COMMENTS

Video: Traffic in Ho Chi Minh City Ho Chi Minh City time lapse Rob Whitworth 635x420

Fresh off the awesome truck, this time-lapse video seems apropos to our earlier discussion regarding motorcycling in Southeast Asia. A short film featuring tens of thousands of photographic stills, photographer Rob Whitworth has not only managed to capture the dense urban nature of Ho Chi Minh City but has also found a way to translate it into a very eye-catching depiction. It’s part chaos, it’s part art. It’s all Vietnam. Video & 18 stills after the jump, while a more detail Q&A on the project can be found at WORD HCMC.

Lawless Jakarta & Some Thoughts About Southeast Asia

01/10/2012 @ 12:51 pm, by Jensen Beeler41 COMMENTS

Here’s a random factoid delivered in the form of a question for you: when looking at the metrics for the A&R website, A&R Twitter account, and A&R Facebook page, which city do you think is responsible for the most readers? We are an American-based website after all, so your top picks might be New York, Los Angeles, or maybe San Francisco, right? Nope. Half our traffic does come from abroad though, so maybe London? Paris? Rome? Barcelona? Wrong again dear readers, because when it comes to a single city consuming the moto-goodness that we publish on a daily basis, none of them have anything on Jakarta, Indonesia (yes, the title of article gave that one away, huh?).

I recently talked about this phenomenon with another online motojournalist, who was experiencing the same trend, and he concluded that it must be employees using proxy servers so they can read blog while at work. I disagreed however, and when looking at where the industry as a whole is currently headed, I think there is something much more basic at play here. Developing countries are the future of motorcycling, and right now Southeast Asia is a hot bed of growth for motorcycle sales. With a less developed infrastructure, and still a need to get from Point A to Point B, motorcycles provide a cheap and effective means of transportation in countries like Indonesia, and for many, motorcycles have become a way of life.