Brad’s Leggero by Walt Siegl

The latest creation from Walt Siegl Motorcycles, Brad’s Leggero helps fill the void left behind by the departure of the Ducati Sport Classic from the Italian company’s lineup. Speaking to those who long for simpler machines, at the core of the Leggero is an air-cooled two-valve Ducati engine, which was built and blueprinted by Bruce Meyers Performance. Helping complete the café racer look is the bullet fairing bodywork, which takes a dash of modern by being made of Kevlar. The modern touches continue, with the use Öhlins suspension and radially mounted Brembo brakes. The effect is a tastefully done café racer that not only shines with real craftsmanship, but also does post-heritage right: taking the best of design from the past, without snubbing the progress of technology in the future.

More Photos of the 2017 Yamaha YZF-R6

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida. Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update. With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it. We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

2017 Yamaha YZF-R6 Gets ABS, Traction Control, & More

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines. On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same. However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter. While more of a model refresh, than an all-new model, Yamaha has gone to great lengths to improve upon a machine that is already leading the supersport category.

HJC Is Coming Out with Star Wars Themed Helmets

Pardon me while I geek out, just a little bit. It looks like HJC has gotten the rights to make Star Wars themed helmets for their 2017 collection. Right now, HJC is showing two helmets, one that mimic’s Kylo Ren’s helmet in The Force Awakens, and the other that replicates Boba Fett’s iconic lid. Both of these themed helmets are based off the HJC RPHA 11 helmet, the company’s top-of-the-line helmet, which also serves as a platform for HJC’s other branded, tribute, and special edition helmets. There will also be a “Death Trooper” helmet, based on the HJC FG-17 helmet, that will debut in time to milk interest from the opening of Rogue One. It should be noted that rumors about a possible Princess Lela helmet, with side-mounted hair buns, are unfounded and possibly started by this publication.

2017 Aprilia Tuono V4 1100 Factory – Just Add Öhlins

It goes without saying that if the 2017 Aprilia Tuono V4 1100 is getting a list of updates at INTERMOT, then the same must be true for the Factory version of the potent 175hp streetfighter. This means that the 2017 Aprilia Tuono V4 1100 Factory takes the new fourth-generation APRC electronics package, Bosch-powered cornering ABS, improved combustion chamber, larger exhaust can, and adds to it the typical Factory-spec improvements like Öhlins suspension (including an Öhlins steering damper). If you haven’t ridden the Aprilia Tuono V4 1100 RR or Factory, we highly recommend it – they’re so choice. The Aprilia Tuono V4 1100 easily competes as one of our favorite motorcycles at Asphalt & Rubber.

2017 Yamaha MT-10 SP – Putting the Europeans on Notice

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today. This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended. The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models. To do this, Yamaha has added semi-active suspension, courtesy of Öhlins. A quickshifter has also been added, along with an assist & slipper clutch.

The Yamaha MT-09 Gets a Facelift & More for 2017

Yamaha’s MT line runs with the tagline “The Dark Side of Japan” and promises edgy and affordable street bikes for urban riders. Someone in Iwata, Japan must have thought that the current Yamaha MT-09 wasn’t quite edgy enough though, which is the only way we can explain the 2017 Yamaha MT-09, which debuted today at the INTERMOT show in Cologne, Germany. Now with a “twin-eyed” LED headlight design, the Yamaha MT-09 feels a little bit more at home when parked next to the Yamaha MT-10 / Yamaha FZ-10 streetfighter. Other changes include an assist/slipper clutch, quickshifter, new suspension, and a redesigned tail section and fender.

Honda CBR1000RR SP2 – Big Red’s New Racing Platform

The current state of the World Superbike Championship rules entirely encourage the adoption once again of “homologation specials” – production bikes whose sole purpose is to be used on the race track. While none of the manufacturers have adopted a radical approach with their homologation special designs, this year’s INTERMOT show has already seen several such machines introduced, the Kawasaki Ninja ZX-10RR, the Suzuki GSX-R1000R, and the Honda CBR1000RR SP2. For Honda, the differences between the SP and SP2 aren’t terribly radical, but they are more purposeful. The 2017 Honda CBR1000RR SP2 does come with several visual cues that are different from the CBR1000RR SP model: carbon insert panels, gold striping on the tri-color paint scheme, and the more obvious Marchesini wheels.

2017 Ducati SuperSport – The Sport Bike Returns

The Ducati SuperSport is back for the 2017 model year, bringing a street-focused sport bike into Ducati’s motorcycle lineup once again. As you would expect, the 2017 Ducati SuperSport will come in two models, the SuperSport base model and a higher-spec SuperSport S model. Both bikes use the 937cc, water-cooled, 113hp v-twin engine that’s found in the Ducati Hypermotard 939. Ducati has also used a steel trellis frame for the SuperSport, which looks very similar to the one used on the current Monster line. Obviously, the front fairing takes some cues from the Panigale superbike. Ducati’s focus is for the SuperSport to augment its street lineup with something sporty that could go on the race track, but would be more at home on twisty roads, even with a passenger on the back.

2017 Honda CBR1000RR SP – Proving Patience is a Virtue

The wait is over. The most anticipated motorcycle of the INTERMOT show is here, the 2017 Honda CBR1000RR SP. We have seen the spy photos of this new superbike, we have seen leaked details on this superbike, and we’ve mused endlessly about this new superbike. And now, we can finally replace that conjecture with fact. First off, the rumors were true. The 2017 Honda CBR1000RR SP sheds a massive 15 kilograms off its bulk, which translates into a 441 lbs mass at the curb. Power has also been increased by almost 11hp, for a total of 190hp at the crank. Honda says that these two figures combined mean a 14% increase in the Honda CBR1000RR’s power-to-weight ratio. That’s pretty astounding, when you consider that under the new fairings is still mostly last year’s bike.

Official Moto3 Regulations Finally Released

11/07/2010 @ 1:14 pm, by Jensen Beeler7 COMMENTS

Announced at Valencia this weekend, the GP Commission has finally released the details on the upcoming Moto3 class, which will replace 125GP racing in 2012. Based around a four-stroke 250cc single-cylinder motor with an 81mm maximum bore size, Moto3 aims to reel in the spiraling costs of GP racing, with numerous provisions that are designed to limit how much money teams and manufacturers can sink into the sport to buy victory.

Perhaps the biggest provision designed to help lower the cost of GP racing’s intro class is the spec-ECU rule, which sees teams limited on the level of electronics they can implement, and institutes a hard-cap on the engine’s maximum RPM (14,000 RPM). With multiple manufacturers able to offer motors and chassis for the racing class, Moto3 should be more open thatn the single-motor Moto2 series. The GP Commission has included a laundry list of other provisions, you can find them bullet-pointed after the jump.

Ducati Pulling Out of WSBK in 2011

08/27/2010 @ 7:12 am, by Jensen Beeler11 COMMENTS

After being unable to achieve the racing regulations in World Superbike that it desires, Ducati has announced that it has officially pulled out of WSBK racing in order to focus its technical efforts on MotoGP racing, and bringing new technology to its street motorcycles. While Ducati Corse will continue to provide motorcycles and support to private teams, the Italian company will not field a factory team in the 2011 season.

Although Xerox is apparently still game to foot the bill for Ducati’s WSBK effort, the title sponsor only wishes to do so if the factory team is winning races. This goal becomes increasingly more difficult for Ducati, who is finding the current 1198 Superbike not on equal footing performance-wise with the inline-four Japanese Superbikes. Closing the performance gap for Ducati means either the simple fix of adding larger throttle bodies to the existing race package, or the expensive choice of developing the 1198 motor further.

Aprilia RSV4 Allowed to Use Gear Driven Camshaft Motor in World Superbike Racing

04/05/2010 @ 6:08 am, by Jensen Beeler4 COMMENTS

World Superbike has clarified its position after teams lodged a complaint against Aprilia for the team’s use of a gear-driven camshaft motor during the practice session at the Phillip Island WSBK stop. Despite the fact that the gear-driven camshaft is a publicly available upgrade to the RSV4 motor, and was not specially outlawed in WSBK regulations, other teams in the paddock threw a fit when they got word that Aprilia was testing the motor while in Australia, and planned to use it in Portimao.

Not wanting to be on the wrongside of the rules, Aprilia refrained from using the technology at Portimao, but it looks like WSBK’s clarification of Rule 2.4.8 would have left the Italian team in the clear, with a caveat.

TTXGP Crowdsources the 2011 Rule Book

01/11/2010 @ 1:57 pm, by Jensen Beeler15 COMMENTS

TTXGP will be getting an added layer of transparency for 2011, as the Azhar “The Czar” Hussain has put his electric motorcycle racing series rule book up in wiki form, and invited competitors and experts to make, modify, and discuss the regulations that TTXGP competitors will have to adhere to in 2011. Acting as arbitrator and moderator over the wiki is lawyer Harry Mallin, which electric motorcycle fans might know better as Brammofan.

Ezpeleta on 1000cc Engine Switch in MotoGP: “Production Engines” Won’t be in the Rule Book

12/08/2009 @ 5:36 pm, by Jensen Beeler7 COMMENTS


There’s be some trouble brewing in the MotoGP/WSBK camp after news hit that MotoGP would be switching back to a 1000cc format by the 2012 season. In that story, several possibilities on how that format would work were put forth by various sides, one such proposal being the running of production based motors in MotoGP.

These motors, which would be based off those found on streetbikes, could be tuned to any degree, provided it met the criteria in the MotoGP rule book (1000cc & four-cylinders are the only regulations agreed upon currently). This news of course drew the ire of World Superbike promoter, Infront Motor Sports, in the form of Paolo Flammini, who believes that format would infringe on his license to exclusively run a production based race series.

Refusing at first to define what a production engine is, Dorna’s Carmelo Ezpeleta is now switching gears and saying the term “production engine” won’t even appear in the new MotoGP racing regulations.

MotoGP May Limit Electronics on Bikes, Takes A Page From Formula1

11/20/2008 @ 10:08 pm, by Jensen Beeler1 COMMENT

Carmelo Ezpeleta (Owner of Dorna Sports, which owns and runs MotoGP), has announced that the premiere motorcycle class of racing will take a cue from the Formula1 racebook, and limit the electronics that can be used while racing a GP motorcycle. This decision comes on the heels of the single tire move made by Dorna in an effort to make GP racing more exciting and evenly matched. 

Traction control for example has been of great concern, and to see why it only takes a brief glance at the latest reviews of the Ducati 1198S Superbike. Critiques of MotoGP have said that allowing such devices let’s less qualified racers into the premiere sport, and that the use of technology can make up where there would otherwise be a gap in rider skill.

Not surprisingly, some of the biggest names ever in the sport have shown signs of support for the rule change. It is unclear what exactly will happen in the future, but Ezpeleta has said that there must be further discussion of the topic, and that no change will occur for the 2009 season, yet looking at where other premiere class sports of gone, the road ahead looks more or less certain.

Source: moto.caradisiac

SkyNet may kill all of mankind, but it won’t take away our GP racing.