Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

MotoCzysz D1g1tal Dr1ve to Power Cars

08/26/2010 @ 2:58 pm, by Jensen Beeler4 COMMENTS

MotoCzysz is partnering with Indiana-based Remy Electric Motors to bring the electric motorcycle power plant to the four-wheeled world. Remy, a former division of General Motors that specialized in electric and hybrid powertrains, developed the D1g1tal Dr1ve system used in the TT Zero and e-Power winning E1pc. According to Remy the D1-10 electric motor makes 135hp and 250 lbs•ft of torque, all while in a compact form-factor. With power outputs likely to improve, and the small footprint of the D1-10, the potential for the collaboration in four-wheeled vehicles is certainly beyond intriguing.

Concept: Chaparral A1 e-Racer by Oberdan Bezzi

08/03/2010 @ 7:52 am, by Jensen Beeler19 COMMENTS

Italian designer Oberdan Bezzi (view our coverage here) is at it again with his pen and paper, and this time he’s set his mind to imagining a battery-powered electric motorcycle. Based off the now defunked Chaparral brand, Bezzi sees the Texan company reinventing itself and entering the electric motorcycle racing scene. The bike has a full carbon chassis, a liquid cooled motor, and great attention to aerodynamics, according to Obiboi. We can also see five removable battery packs on each side of the motorcycle, and single shock suspension used not only on the rear, but also on the front fork assembly.

Wait…we feel like we’ve seen this before…Yes, it seems Bezzi has ripped-off every detail found on the MotoCzysz E1pc, right down to the motor and controller mounting points. Of course the A1 e-Racer looks like the E1pc 1.0, with its square battery packs. Oberdan must have missed our article on the eDD where we explained that the E1pc’s chevron shaped batteries allowed for more front wheel clearance. Imitation is the highest form of flattery, right Michael?

MotoCzysz Wins e-Power at Laguna Seca

07/26/2010 @ 10:48 am, by Jensen Beeler9 COMMENTS

The FIM’s e-Power Championship came to American soil this weekend, as the series piggybacked off the Red Bull US GP. Twelve teams from around the world arrived at Laguna Seca to test their mettle against the historic and technical track. While the racing would technically be bike against bike, the undulating tarmac of Seca was certainly also an adversary as well.

Lightning Motors and Michael Barnes took the pole position during Saturday’s qualifying, leaving MotoCzysz and Michael Czysz relegated to the second position on the starting line. Coming from behind on Sunday’s race, MotoCzysz won the e-Power race at Laguna Seca with a dramatic pass just 10 feet from the finish line.

Future.

07/20/2010 @ 8:09 am, by Jensen Beeler9 COMMENTS

Track Testing with MotoCzysz

07/08/2010 @ 4:07 pm, by Jensen Beeler7 COMMENTS

Over the long weekend, Asphalt & Rubber got the chance to swing by Portland International Raceway for MotoCzysz’s first track test with the 2010 E1pc electric race bike. It’s hard to believe, but this was Michael Czysz’s first time riding his creation on the track. The session was prompted by Czysz’s need to get ready to race the E1pc at the up-coming e-Power Championship race at Laguna Seca. Czysz had hinted to us several months ago that he might pilot the electric race bike at Seca, and now has confirmed that intention to race the bike himself. .

Getting to tag along during the new E1pc’s first actual track test, we got to see how the 2010 MotoCzysz E1pc compared to ICE track bikes while lapping at PIR. Observations, photos, and two videos that prove we need to get a proper camcorder in the A&R office are awaiting you after the jump.

Around the Isle of Man with the MotoCzysz E1pc

06/23/2010 @ 12:13 pm, by Jensen Beeler6 COMMENTS

The Isle of Man TT organizers have released some on-board footage of the TT Zero winning 2010 MotoCzysz E1pc. Other than the impressive speed from the electric sportbike, what’s really noticeable about this video is the wind noise. The subject of electric motorcycles lacking the exhaust note normally associated with motorcycles has been hashed out numerous times before, but watching this video reminds us of a comment that Michael Czysz once made to us about how electric motorcycles were like sailboats.

Once you get out to the open water, and turn off your motor it transforms the experience into something else. We imagine that must have crossed rider Mark Miller’s mind at some point…before he quickly had to train his attention on the rapidly approaching street course. Check the video out after the jump.

Up-Close with the TT Winning MotoCzysz E1pc

06/10/2010 @ 6:23 pm, by Jensen Beeler1 COMMENT

Last week we got a leaked photo of the 2010 MotoCzysz E1pc, and knew the bike would be a contender in today’s TT Zero at the Isle of Man. Now that the TT for electrics is over, we can get a closer look at the machine that left the competition behind in the dust. MotoCzysz was a scratch at last year’s TT, and following that mantra the team effectively started-over from scratch for their 2010 effort. Back for 2010, there is of course the familiar MotoCzysz-designed 6X Flex front-end suspension system, but the rest of the bike centers around a revised energy package that’s been refined to engineering simplicity.

We’ve already covered how the central “suitcase” or eDD incorporates space maximizing v-shaped removable battery packs that pop-out with the push of a button. And how the entire 2010 MotoCzysz E1pc involves virtually no wiring, since everything dovetails perfectly together. We’ve also covered how the MotoCzysz D1-10 motor is replacing the three Agni motors from last year’s bike. Running off nearly 500 volts of power, the liquid-cooled IPM motor makes 250lbs•ft of torque, and generates over 100hp. The aerodynamics of the 2010 bike have been completely rethought, and employ a palatable design that achieves the aerodynamic goals to give the team a greater advantage with their limited on-board energy.

All of this is well and good, but it doesn’t mean shit if the bike doesn’t go fast.

MotoCzysz Wins TT Zero – 96.820 MPH Average

06/10/2010 @ 9:51 am, by Jensen Beeler12 COMMENTS

Mark Miller took the 2010 MotoCzysz E1pc to victory today at the Isle of Man’s TT Zero race. Miller lapped the MotoCzysz E1pc around the Mountain Course with an average speed of 96.820 MPH and with a time of 23:22.890. Just shy of the 100 MPH average speed barrier, Miller passed through the Sulby speed trap going 135.300 MPH, and topped 140 MPH at one point.

Following Miller was Rob “Bullet” Barber who averaged 89.290 MPH on the streamlined Team Agni machine. James McBride finished on the podium with a 88.653 MPH average on the Man TTX race bike. Jennifer Tinmouth on the second Agni finished 4th, just seven seconds behind McBride.

The Big Question for Tomorrow’s TT Zero Is…

06/08/2010 @ 3:02 pm, by Jensen Beeler13 COMMENTS

What’s going to be mounted on these protruding brackets? So far the 2010 MotoCzysz E1pc has been lapping the Isle of Man without its full fairing on the motorcycle. If history teaches us anything, the presumption, of course, should be that MotoCzysz has something still up its sleeve before the team takes to the Mountain Course tomorrow for the TT Zero event. Last year it was batteries in the tail-section, this year it would seem to be streamlining the E1pc.

While Michael Czysz has derided the use of a dustbin style fairings in road racing, he has acknowledged that a course like the Isle of Man creates an opportunity for a race team to find some benefits in the design. As such, Czysz wrote three months ago that he would have a dustbin fairing at the ready, should someone else show up with one as well…and that’s exactly what’s happened.

MotoCzysz Sets Unofficial Lap Record at TT Zero with 94MPH Lap – Closing in on £10,000 prize

06/07/2010 @ 1:28 pm, by Jensen Beeler3 COMMENTS

MotoCzysz set an unofficial lap record today at the TT Zero, the Isle of Man’s electric class for the Isle of Man TT. Averaging 94.664 mph over the Mountain Course, Mark Miller and the 2010 MotoCzysz E1pc were clocked doing 131.1 mph through the Sulby speed trap. Compare those times to Rob Barber & Team Agni’s 83.689 mph run for the day, which was short of the team’s 2009 performance of 87.434mph (which is also the current class record). The Isle of Man government has setup a £10,000 prize for the first team to crack the 100mph average barrier, which could well be in MotoCzysz’s grasp after today’s showing.