David Yurman Forged Carbon Moto by Walt Siegl

Many of you have likely seen Walt Siegl’s “Bol D’Or” custom MV Agusta Brutale 800 with a retro-flare. It is an amazing piece of work, and the basis for today’s post, which brings you a glimpse of the David Yurman Forged Carbon Moto by Walt Siegl. Actually the first model from Walt Siegl’s Bol B’Or line, we are just seeing this motorcycle now because it comes with a twist: it has forged carbon parts, crafted by jewelry maker David Yurman. A lot can be said about forged carbon, enough worthy of its own article, but the tl;dr version is that the composite material is set to replace traditional carbon fiber parts – in a big way. When you add that to an already attractive motorcycle design, well…checkout the hi-res photos yourself.

Skully Investors Oust Founders, Marcus & Mitch Weller

TechCrunch is reporting, and our sources have confirmed, that the investors behind the Skully AR-1 helmet have ousted one of the company’s founders, Marcus Weller, along with his brother Mitch Weller. For those who don’t know, Marcus Weller was Skully’s CEO, while Mitch Weller served as the company’s Chief of Staff. The departure of the Weller brothers comes after Skully continually missed its delivery deadlines with its first product, the Skully AR-1, which is a helmet with an integrated rear-facing camera, small computer system, and heads-up-display oculus. Hopefully this means that Skully will finally get on the right path and begin delivery helmets to its plethora of early backers. We are not holding our breath, however.

2017 Montesa Cota 4RT260 Gets “BNG” – Still Awesome

Normally, we would roast a brand for bringing a “bold new graphics” model to market, but in the case of the 2017 Montesa Cota 4RT260, we will give the Spanish firm a pass…purely because we think trials riding is AWESOME. So, yup…for the 2017 model year, Montessa is brining basically the same machine to market, with the big changes being the red, white, and blue HRC-inspired color scheme, along with the chromed fork tubes that have black-painted lowers. If it counts as a technical change, the kickstarter lever has been made longer than on what is found on the 2016 model, and of course there is a “race replica” version, which drips in carbon fiber, Showa suspension pieces, and has the traditional Repsol livery.

Bottpower BOTT XR1R – The Street Tracker You Deserve

The Bottpower BOTT XR1R is the bike that Harley-Davidson should be building right now, and it’s the kind of machine that actually would have benefitted from Buell’s “innovations” for street bikes. With 150hp and a target weight of 150kg, the BOTT XR1R should be plenty of fun on tight circuits, but still powerful enough for longer courses. And then of course, once you’re done flogging the XR1R for the day, you will still want to spend a couple hours drooling over its titanium frame, carbon fiber bodyworks, and modern-day electronics. We have always been a fan of Bottpower’s work, but it still feels strange to say that the Spanish builder has created the bike that America has been dreaming of for the past decade or more.

Ducati 1299 Panigale S Anniversario – Celebrating 90 Years

Ducati is celebrating its 90th anniversary this year, with the culmination of that celebration happening at World Ducati Week. As we previewed already, Ducati would give a sneak peak of a new model at the event, and debut a limited edition machine as well. Well, we have had more than a sneak peak of the upcoming Ducati Supersport model, and now we get the full monty of the Ducati 1299 Panigale S Anniversario – a special superbike that commemorates 90 years of Ducati motorcycles. Only 500 machines will get the Ducati 1299 Panigale S Anniversario’s limited edition paint job, gold-colored metal pieces, and bevy of technical upgrades. One interesting new feature though is the debut of the EVO version of the Ducati Traction Control (DTC) and Ducati Wheelie Control (DWC) systems.

Some Details on the New Ducati Supersport

You may have already seen the leaked photo from World Ducati Week, which shows that the Ducati Supersport is making a return to Bologna’s lineup. We haven’t seen the “Supersport” sport-touring line in almost a decade, but it will be making a return for the 2017 model year, with two bikes. Since yours truly is at World Ducati Week this year, I was able to get a peak at the Supersport, and can share with you some details on the machine. The Ducati Supersport has a rich history as a sport-tourer; back when that segment actually existed, and was distinct from being just a superbike for the road. This model seems very much a return to that past.

Ducati SuperSport S Spotted at World Ducati Week

Of the many attractions at the Misano World Circuit Marco Simoncelli, Ducati is giving enthusiasts a chance to preview a new bike that will officially debut at the EICMA show in Milan (in addition to the two machines that will unveil tomorrow). The affair is a strictly managed, no cellphones allowed, sort of sneak peak at the new machine – thus, it comes as no surprise that some fan has snapped a photo of the secret bike on a hidden phone. In case you were wondering, this is why we can’t have nice things. You can’t put the cat back in the bag though, so get ready folks because we have good news: the Ducati SuperSport is coming back! As you can see in the photo, the machine in question is called the Ducati Supersport S, an homage to the bikes of the same name that came almost 40 years before it.

The Bullshit Argument That It’s Time to Say Goodbye to the Honda CBR600RR and Other Supersport Machines

British magazines MCN dropped a bombshell on the motorcycle world today, reporting that Honda was set to discontinue the Honda CBR600RR, with no supersport replacement in sight. According to their reports, the main impetus for the Honda CBR600RR being discontinued is the Euro 4 emission standards, which the Honda CBR600RR does not meet. Honda feels too that the demand for a 600cc sport bike is too low to warrant updating the CBR600RR to meet Euro 4 regulations, let alone building an all-new machine for the market that would be Euro 4 compliant.

KTM Is Working on an 800cc Parallel-Twin ADV Bike

“If your quarry goes to ground, leave no ground to go to” seems to be KTM’s marching orders right now, as the Austrian brand is pushing into seemingly every segment and market with its motorcycle lineup. KTM already has a robust off-road lineup, which they have used to launch themselves into the ADV category with great success. As such, the KTM 1190 Adventure series already sees strong sales success with adventure-touring riders, but KTM isn’t resting on those laurels. Set to debut a 800cc parallel-twin platform later this year, KTM CEO Stefan Pierer has revealed, while talking to MCN, that his company will soon have a rival for the Honda Africa Twin.

XTR Pepo’s “Siluro” Custom Ducati Monster 1200

It has been a while since we showed you one of XTR Pepo’s custom works, so please forgive our sins. To make it up to you though, we have the Siluro, a custom Ducati Monster 1200 that Ducati Spain commissioned from the Spanish bike builder. If I’m honest, Ducati’s Monster line has really never struck a chord with me, but there is something about the Siluro that’s got me more than a little twitterpated. Perhaps it is the high-mount, scrambler-styled Termignoni exhaust, or maybe it is Pepo’s signature “RAD” seat, that has adorned so many custom Ducati’s before this one, but is now wrapped in suede. Whatever it is, it’s working.

How is Steve Rapp Like Moses? They Were Both on a Mission to the Promised Land

07/23/2011 @ 11:17 pm, by Jensen Beeler3 COMMENTS

The joint e-Power/TTXGP round at Laguna Seca saw its second round today, with virtually all the riders improving upon their times from yesterday’s free practice. Once again at the top was Supersport-paced Mission R, which was piloted by Steve Rapp to a 1’31.376 pole-position time. One of the only shake-ups on the grid position, Lightning Motorcycles bested last year’s winner MotoCzysz for the second starting position, as the company from San Carlos found some more cornering speed from its previous Isle of Man suspension setup.

MotoCzysz also improved upon its unique suspension design, looking very strong down the straight-away. Hopefully Czysz can find some more speed and make the battle for second a close one, while the battle for fourth should be a hot contest with Germany’s Münch Racing just five hundredths of a second ahead of Oregon’s Brammo. Qualifying results are after the jump, and check back tomorrow for our full coverage of the Laguna Seca electric round.

Mission Motors Laps at AMA Supersport Pace at Laguna Seca

07/23/2011 @ 1:06 am, by Jensen Beeler4 COMMENTS

While the REFUEL event a few weeks ago was Mission Motors’ true first public race with the Mission R, the San Francisco company is on a mission (oh sweet jesus) to prove a point at Laguna Seca this weekend, after previously being out of the electric racing gig for the past year. Undoubtedly by now you’ve seen photos of the Mission R electric superbike, and while it certainly looks fast standing still, the question had also been raised if it’s only good for standing around and looking pretty.

Taking those talking points to heart, Steve Rapp silenced those critics today, as the Mission Motors rider smashed the standing “best lap” time from last year’s e-Power Championship race at Laguna Seca, which was set by competitor MotoCzysz. Posting a 1’33.714 lap time, Rapp was nearly 11 seconds quicker than last year’s pace, and did so at will on the Mission R, posting half of his laps below the 1’34 mark (his slowest hot lap was a 1’36).

To put that pace into perspective, Rapp would have been fifth on the grid had he been lapping in AMA Supersport’s Free Practice (which occurred early in the day, and thus on a cold track), and thirteenth in AMA Supersport’s Qualifying Practice 1 (which was later in the day, and in similar conditions as the e-Power/TTXGP session). Boom goes the dynamite.

One Lap on the Mission Motors Mission R at Laguna Seca

06/27/2011 @ 6:18 pm, by Jensen Beeler9 COMMENTS

The Mission Motors crew was out at Laguna Seca this past weekend with the Mission R electric superbike. Taking part in the Refuel Time Trial, Steve Rapp piloted the Mission R around the historic coastal Californian track, clocking in a top lap time of 1:43.700 according to the Mission stopwatches. With that pace, it would put the Mission R as backmarker in the AMA Supersport race at Laguna Seca last year, and about 15 seconds off Steve Rapp’s own Daytona SportBike time at the same event.

While true sportbike parity isn’t here yet, this is to only the second time that Mission Motors has had the Mission R on the track (Mission somehow sneaked the Mission R onto Thunderhill Raceway without our Bothans informing us), which makes the lap a pretty impressive starting point for the design. Check the video after the jump.

Up-Close with the Mission R at Infineon Raceway

05/16/2011 @ 8:01 am, by Jensen Beeler11 COMMENTS

It’s a good thing for Mission Motors that the Mission R looks fast standing still, as the electric superbike was unable to race in this weekend’s TTXGP series opener at Infineon Raceway. The Mission crew did bring the bike out for fans to see though, which gave us a chance to get up-close and personal with the machine with a camera in-hand. Electricity aside, the Mission R is one of the most attractive motorcycles we’ve seen in a while (even without its clothes on), and the fit & finish on the bike is superb…now if only it actually ran.

We can’t wait to see how the Mission R fares on the track, especially with Steve Rapp on-board. Mission tells us it will be at some of the upcoming TTXGP events, which would be an unfortunate place to launch the Mission R, considering A&R has a strict rule about blogging from New Hampshire. We’ll see what our Bothans can do about sneaking a peak of the bike testing before the next TTXGP round; until then, here are 25 photos to ruin your Monday productivity.

Mission Motors Racing at Infineon with Steve Rapp*

05/03/2011 @ 10:27 am, by Jensen Beeler3 COMMENTS

More news from the Asphalt & Rubber Bothan Spy network (that’d be a great spin-off site by the way…if George Lucas wouldn’t bullseye us like womp rats from a T-16 for our copious use of Star Wars references in our posts), as we’ve gotten word that Mission Motors is gearing up to go racing at the TTXGP season-opener at Infineon Raceway in two weeks’ time. At the helm of the gorgeous Mission R electric superbike will be AMA Pro Racing’s Steve Rapp.

The caveat to this news is that it all is contingent on Mission Motors getting its race bike ready to race in time for the event. The Bothans go on to tell us that the bike’s battery pack still needs to come together, which is something we’ve heard for some time now, but could suggest that the team has advanced its tech further and is upgrading the Mission R for even more on-board energy/power. As always, time will tell.

Motorcycle Porn: Mission R Swingarm by Speedymoto

01/27/2011 @ 3:04 pm, by Jensen Beeler7 COMMENTS

UPDATE: According to Mission Motors’ Edward West, the single-sided swingarm weighs 13.6 lbs alone, and 18.8 lbs with the slider for the chain tensioner/wheelbase adjuster installed.

The Mission R electric superbike by Mission Motors is one of those motorcycles that looks great by itself in a photo, and then looks even better once you see it in person. Up-close it is easier to appreciate the finer details that went into making the Mission R, like the all-carbon “fuel tank” and battery enclosure, the chrome-moly trellis frame, and of course the single-piece billet aluminum swingarm that was produced by Speedymoto.

Like most things built by Speedymoto, the Mission R swingarm could be a piece of art in its own right (I’ve got a few Speedymoto parts on my Streetfighter for this very reason), and the Oregon-based company has posted some behind the scenes shots and details of its work. Photos and more after the jump.

The Mission R with Its Clothes Off

01/18/2011 @ 12:37 pm, by Jensen Beeler10 COMMENTS

The Mission R, the latest creation to come from San Francisco-based Mission Motors, looks like any typical gasoline-powered sportbike (well, any really good looking gasoline-powered sportbike), and that’s sort of the point behind the machine: an electric motorcycle that can excite petrol-heads and electron nerds alike. Although the Mission R was made to draw mainstream appeal, today we see further proof that any resemblance to modern ICE motorcycles was made to be only skin deep.

Beneath the carbon-laid fairings of the Mission R, we see a hint of the bike’s unique chrome-moly trellis frame that mates to a previously hidden headstock/front sub-frame unit that was made by Speedymoto and designed by James Parker (of GSX-RADD fame). With the Mission R’s mass centralized around the 141hp 3-phace AC induction motor, Parker also had to contend with Mission’s carbon enclosed two-tiered battery pack that comprises the bulk of the race bike’s weight.

Read after the jump as Parker walks us through his process and thoughts on designing the Mission R, and be sure to check out the photo galleries for an up-close look.

Mission Motors Helps Power Honda to Podium Finish

12/30/2010 @ 2:02 pm, by Jensen Beeler1 COMMENT

The Mission R electric Superbike is just one of many new projects to come out of San Francisco based startup Mission Motors. Despite the newswires over the past year being noticeably quiet from Mission, the company has been toiling away on more than a few projects, especially after launching its MissionEVT components and services offering.

Showing off its electric and hybrid chops at SEMA this year, we get news that Mission Motors has been working with OEMs to help integrate electrical components into their product offerings. One such example of this is a project Mission Motors undertook with Honda Automobiles, which saw a Honda CR-Z Hybrid upgraded with MissionEVT components, and then raced at the 25hrs of Thunderhill endurance event a few weeks ago.

Mission R Electric Superbike Breaks Cover

12/17/2010 @ 12:01 am, by Jensen Beeler20 COMMENTS

After teasing us earlier last month with its silhouette, Mission Motors has finally taken the wraps off its Mission R electric race bike. Boasting some big numbers, namely a 14.4 kWh battery pack and a 3-phace AC induction motor that makes 141hp and 115 lbs•ft of torque, the Mission R ticks all the right performance boxes with its 160mph top speed, 100 kW motor controller, regenative breaking, and barely race legal 545 lbs weight.

Taking lessons learned from the Mission One, Mission Motors has built the Mission R from the ground-up, and tapped some well known names to help the company make this striking motorcycle. With James Parker (of GSX-RADD fame) designing the chassis, and Tim Prentice of Motonium working on the industrial design, the Mission R is not only a very pleasing motorcycle to look at (drool over that billet single-sided swingarm), but also incorporates some advanced concepts to make it a potent and compact racing weapon. Oh, and did we mention the bike looks freaking fantastic?

Mission R – Mission Motors Teases Its 2nd-Gen Racer

11/03/2010 @ 11:21 pm, by Jensen Beeler3 COMMENTS

Mission Motors is teasing the silhouette of its new Mission R race bike, which is set to go racing in 2011. While details are scarce on the Mission R’s technical aspects, we’ve been told that the new design looks very promising, and is more palatable visually to a larger audience than the original Mission One. It doesn’t take much for us to guess some aspects of the Mission R though, as Mission Motors was on-hand for Specialty Equipment Marketing Association show (SEMA) this week (you know that other industry trade show that’s going on), with a bevy of announcements.

The most prominent piece of news from the San Franciscan-based company is that it is making available its proprietary electric drive system, which will come from a special group inside the company, dubbed MissionEVT, which is focused on bringing EV tech to other companies and applications beyond motorcycles.