Honda Africa Twin Supermoto Concept by Nicolas Petit

The Honda Africa Twin doesn’t lend itself naturally to a supermoto format, though it is one of the most capable off-road adventure bikes on the market, but you have to admit that this photoshop render by French designer Nicolas Petit is very intriguing. Maybe it’s our obvious bias towards anything supermoto that is talking, or maybe it’s that there is something to the idea of taking the Africa Twin, adding 17” wheels, and lowering it just enough that riders can actually flat-foot the machine while sitting on it. Add in some styling cues that scream “supermotard” and you have a very handsome machine that is ready to conquer anything the urban environment can throw at it. Hell, it’s probably just a scary clown costume away from a good time on a gravel road. Right??!

Brad’s Leggero by Walt Siegl

The latest creation from Walt Siegl Motorcycles, Brad’s Leggero helps fill the void left behind by the departure of the Ducati Sport Classic from the Italian company’s lineup. Speaking to those who long for simpler machines, at the core of the Leggero is an air-cooled two-valve Ducati engine, which was built and blueprinted by Bruce Meyers Performance. Helping complete the café racer look is the bullet fairing bodywork, which takes a dash of modern by being made of Kevlar. The modern touches continue, with the use Öhlins suspension and radially mounted Brembo brakes. The effect is a tastefully done café racer that not only shines with real craftsmanship, but also does post-heritage right: taking the best of design from the past, without snubbing the progress of technology in the future.

More Photos of the 2017 Yamaha YZF-R6

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida. Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update. With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it. We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

2017 Yamaha YZF-R6 Gets ABS, Traction Control, & More

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines. On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same. However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter. While more of a model refresh, than an all-new model, Yamaha has gone to great lengths to improve upon a machine that is already leading the supersport category.

HJC Is Coming Out with Star Wars Themed Helmets

Pardon me while I geek out, just a little bit. It looks like HJC has gotten the rights to make Star Wars themed helmets for their 2017 collection. Right now, HJC is showing two helmets, one that mimic’s Kylo Ren’s helmet in The Force Awakens, and the other that replicates Boba Fett’s iconic lid. Both of these themed helmets are based off the HJC RPHA 11 helmet, the company’s top-of-the-line helmet, which also serves as a platform for HJC’s other branded, tribute, and special edition helmets. There will also be a “Death Trooper” helmet, based on the HJC FG-17 helmet, that will debut in time to milk interest from the opening of Rogue One. It should be noted that rumors about a possible Princess Lela helmet, with side-mounted hair buns, are unfounded and possibly started by this publication.

2017 Aprilia Tuono V4 1100 Factory – Just Add Öhlins

It goes without saying that if the 2017 Aprilia Tuono V4 1100 is getting a list of updates at INTERMOT, then the same must be true for the Factory version of the potent 175hp streetfighter. This means that the 2017 Aprilia Tuono V4 1100 Factory takes the new fourth-generation APRC electronics package, Bosch-powered cornering ABS, improved combustion chamber, larger exhaust can, and adds to it the typical Factory-spec improvements like Öhlins suspension (including an Öhlins steering damper). If you haven’t ridden the Aprilia Tuono V4 1100 RR or Factory, we highly recommend it – they’re so choice. The Aprilia Tuono V4 1100 easily competes as one of our favorite motorcycles at Asphalt & Rubber.

2017 Yamaha MT-10 SP – Putting the Europeans on Notice

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today. This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended. The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models. To do this, Yamaha has added semi-active suspension, courtesy of Öhlins. A quickshifter has also been added, along with an assist & slipper clutch.

The Yamaha MT-09 Gets a Facelift & More for 2017

Yamaha’s MT line runs with the tagline “The Dark Side of Japan” and promises edgy and affordable street bikes for urban riders. Someone in Iwata, Japan must have thought that the current Yamaha MT-09 wasn’t quite edgy enough though, which is the only way we can explain the 2017 Yamaha MT-09, which debuted today at the INTERMOT show in Cologne, Germany. Now with a “twin-eyed” LED headlight design, the Yamaha MT-09 feels a little bit more at home when parked next to the Yamaha MT-10 / Yamaha FZ-10 streetfighter. Other changes include an assist/slipper clutch, quickshifter, new suspension, and a redesigned tail section and fender.

Honda CBR1000RR SP2 – Big Red’s New Racing Platform

The current state of the World Superbike Championship rules entirely encourage the adoption once again of “homologation specials” – production bikes whose sole purpose is to be used on the race track. While none of the manufacturers have adopted a radical approach with their homologation special designs, this year’s INTERMOT show has already seen several such machines introduced, the Kawasaki Ninja ZX-10RR, the Suzuki GSX-R1000R, and the Honda CBR1000RR SP2. For Honda, the differences between the SP and SP2 aren’t terribly radical, but they are more purposeful. The 2017 Honda CBR1000RR SP2 does come with several visual cues that are different from the CBR1000RR SP model: carbon insert panels, gold striping on the tri-color paint scheme, and the more obvious Marchesini wheels.

2017 Ducati SuperSport – The Sport Bike Returns

The Ducati SuperSport is back for the 2017 model year, bringing a street-focused sport bike into Ducati’s motorcycle lineup once again. As you would expect, the 2017 Ducati SuperSport will come in two models, the SuperSport base model and a higher-spec SuperSport S model. Both bikes use the 937cc, water-cooled, 113hp v-twin engine that’s found in the Ducati Hypermotard 939. Ducati has also used a steel trellis frame for the SuperSport, which looks very similar to the one used on the current Monster line. Obviously, the front fairing takes some cues from the Panigale superbike. Ducati’s focus is for the SuperSport to augment its street lineup with something sporty that could go on the race track, but would be more at home on twisty roads, even with a passenger on the back.

2012 Ducati 1199 Panigale – 195hp / 395 lbs (Base)

09/23/2011 @ 11:31 pm, by Jensen Beeler8 COMMENTS

Confirming what we reported back in November of last year regarding the performance figures for Ducati’s new Superbike, Ducati dealership Pro-Italia posted on its Facebook wall (now redacted) a less-than-cryptic “395/195” message while in attendance at the Ducati Dealership meeting in Miami, Floria. Noting the wet weight and brake horsepower, the new 2012 Ducati 1199 Panigale makes good on its promise to trump its predecessor by over 20hp and 20 lbs. To thank for the these benchmark miracles is the 1199 Panigale’s very over-square Superquadrata motor (also known as the SuperQuadro in some rumor reports), which will rev higher than any other previous Ducati Superbike motor to-date, and the company’s new “frameless” chassis design, which has been floundering in MotoGP.

While we can’t speak for the efficacy of Ducati’s new chassis philosophy, and how it will work on the company’s new v-twin production bike, the spec-sheet racers should be impressed with this latest piece of information. And as if those figures weren’t impressive enough already, Asphalt & Rubber has learned that the Ducati 1199 Panigale homologation special, the made-for-racing “production” model which has been making its appearance in the bulk of the 1199’s spy shots, has been producing over 205hp at the crank during its recent testing at Borgo Panigale facility (the namesake for the 1199 Superbike), while in its “stock” form. While we don’t know what naming convention Ducati will use on the race-bike-with-lights-on-it 1199, A&R does know that it will not receive “R” nomenclature that we’ve seen in the past.

Are Electronics the New Horsepower?

03/01/2011 @ 11:33 am, by Jensen Beeler16 COMMENTS

The news of the 2011 Aprilia RSV4 R APRC got me thinking today about where the sport bike market is headed from a big picture perspective.

The sport bike market has been dominated the constant need to develop motorcycles with more power, less weight, and new performance enhancing technologies, and you’d be hard pressed to find a year where the bike with the most horsepower wasn’t the top-seller in this category (case in point: the complete sales domination of the BMW S1000RR during 2010).

For years the motorcycle manufacturers, especially the Japanese, have been painting themselves into a corner by constantly having to one-up each other with horsepower figures in order to sell motorcycles in this segment.

With bikes like the 2011 Kawasaki Ninja ZX-10R approaching the 200hp barrier, the question about “how much power is enough?” has been cropping up, and it certainly could be that we’re approaching the point in time where the relevancy of this metric is losing it’s power (pun moderately intended).

So what will be the new kingmaker for sport bikes? The electronics package.

Official: 2011 Kawasaki ZX-10R Gets 750 RPM Redline Reduction Because of EPA Noise Laws

10/08/2010 @ 3:58 pm, by Jensen Beeler14 COMMENTS

We just got off the phone with Kawasaki HQ, and it’s official: the 2011 Kawasaki ZX-10R will inadvertently get a power decrease when it comes to the United States because of the EPA’s regulation of noise pollution, confirming earlier rumors from this week. The issue surrounds the EPA’s new methodology for measuring exhaust noise levels, which now involves taking the measurement at a percentage of the total rev range, instead of a specific rpm value.

The result is that the 2011 Kawasaki ZX-10R passes the Euro III standards, but fails the EPA standards in its unadulterated form. To come into compliance with the EPA’s Noise Control Act, Kawasaki has lowered the rev-limit on the 2011 Kawasaki ZX-10R by 750 rpm in order to meet the new criteria. The byproduct of lowering the rev-limiter will reduce the new ZX-10R’s maximum power output, but Kawasaki isn’t saying by how much.

Rumor: 2011 Kawasaki ZX-10R Getting Horsepower Reduction for the American Market

10/07/2010 @ 6:20 am, by Jensen Beeler2 COMMENTS

Immediately after the launch of the 2011 Kawasaki ZX-10R, which claimed a 207hp figure at the crank with ram-air (197hp sans the air), rumors began to swell that the new ZX-10R’s peak performance figure would be drastically less in the American market. Apparently and supposedly due to federal regulations by the EPA, Kawasaki will be lowering the rev-limiter on the 2011 Kawasaki ZX-10R in order to comply with US government provisions.

Whether those rumors are in regards to the ZX-10R’s emissions or noise levels at that rev range is unclear at this time, but speculation that the power decrease is due to the new 10R’s peak power figure being north of 200hp are completely unfounded (Editor’s note: the United States has no provisions, at both the state and federal level, that cap motorcycle horsepower performance levels from the factory). We’ve reached out to Kawasaki for an official response on the issue, more as we get it.

Aprilia RSV4 Gear Driven Camshaft Good For 3-5HP

07/01/2010 @ 6:52 pm, by Jensen Beeler6 COMMENTS

After getting the nod to use their gear driven camshaft in World Superbike racing (shown above is the Aprilia’s belt driven camshaft), Aprilia has become a tour de force on the WSBK grid. Aprilia first used the gear driven cams in race environment while at the Miller Motorsports Park round, much to the protest of the other teams.

Aprilia and Max Biaggi have been on a bender since the new camshaft’s implementation, with the Aprilia RSV4 going double-double (no, not that Double-Double) and winning every race since the gear driven camshaft was installed on the race bike.

European Commission Could Be Considering 100HP Limit for Motorcycles

03/29/2010 @ 3:32 pm, by Jensen Beeler20 COMMENTS

Several publications are reporting the possibility that the European Commission (EC) could be preparing to implement a European-wide limit of 100HP on motorcycles when the European executive power meets this summer. The issue arises after France instituted a 100HP ban on new motorcycles, causing the country to be out of line with the rest of European Union. France’s new law places an undue burden on manufacturers, who must now make a French variant for each new EU motorcycle model (or just not offer the bike in the French market all-together), and as such the EC aims to bring the EU under one policy.

This has created cause for alarm in the industry (or just in sensationalist journalists) who fear that the EC could place 100HP limits across the entire EU, along with other hindering provisions as well (mandatory ABS brakes seems to be the other main concern), in order to bring balance to the Union’s approach on motorcycles. If that sounds ridiculous to you, then you’re in the same boast as us. Considering how the EC and EU directives, regulations, and decisions actually operate, the real likelihood seems to be the possibility of France’s law being repealed, but that doesn’t mean activists have any less cause for alarm.

BMW Sandbags S1000RR Power Figures – Makes 183hp at the Wheel on the Dyno

12/12/2009 @ 5:58 pm, by Jensen Beeler8 COMMENTS


When BMW announced the S1000RR, they claimed power figures of 193hp at the crank. While the clear class winner on quoted power figures, OEM claims on horsepower are “ambitious” when viewed in even the most favorable of light. However as Bike found out in the case of the S1000RR, it would seem that BMW might have actually under-promised on the bike’s performance potential, and then over-delivered.