Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

XXX: 2014 Honda RCV1000R

11/08/2013 @ 1:41 am, by Jensen Beeler20 COMMENTS

XXX: 2014 Honda RCV1000R 2014 Honda RCV1000R MotoGP 05 635x423

While the talk of the Valencian GP will be the on-track action between Marc Marquez and Jorge Lorenzo, the off-track chatter is about HRC’s open class race bike for private teams, the Honda RCV1000R. This is the machine that Nicky Hayden, Scott Redding, and Karel Abraham, with other riders expected to be added, hope will close the gap between factory and private teams.

Like its predecessor, the 2014 Honda RCV1000R uses a 999.5cc 90° V4 engine, and while there are many similarities between the two bikes, there are major differences as well. Specifically, the Honda RCV1000R uses conventional steel valve springs, instead of the Honda RC213V’s pneumatic valve springs; and a conventional gearbox, instead of the factory bike’s seamless gearbox design.

Still the RCV1000R is an impressive machine, and in the hands of Casey Stoner the bike lapped within 0.3 seconds as the RCV213V on the same tires. When shod with the CRT-spec Bridgestone rubber, Stoner was within 0.17 seconds of his factory bike lap time. What the will translate to on race day remains to be seen though.

Costing around €1,200,000 for the first season, and €500,000 for the upgrade package in the second season, teams are still paying quite a bit of coin for a GP bike, especially since HRC is barring them from making their own modifications to the engine. Still, the Honda RCV1000R is a much cheaper option to the satellite-spec RC213V. We just think it looks great — a bevy of high-resolution photos are after the jump.

Honda RCV1000R — HRC’s “Open Class” Racer for MotoGP

11/07/2013 @ 8:01 am, by Jensen Beeler27 COMMENTS

Honda RCV1000R    HRCs Open Class Racer for MotoGP 2014 Honda RCV1000R produciton racer motogp Scott Jones 03 635x423

On Monday, the new Honda RCV1000R production racer from HRC will take to the Circuit Ricardo Tormo in Valencia, Spain for its first public testing session. HRC couldn’t wait to show off its machine though, and held a press conference today at the Valencian GP for the MotoGP press pool.

Based closely off the Honda RC213V that Dani Pedrosa, Marc Marquez, Stefan Bradl, and Alvaro Bautista are racing with this season, the Honda RCV1000R will fit under the “Open Class” set of rules, and be campaigned by Nicky Hayden, Scott Redding, and Karel Abraham, with further riders expected to be added to that list.

Officially Official: Aspar Switches to Honda RCV1000R, Signs Guy from Owensboro

10/17/2013 @ 7:56 am, by David Emmett8 COMMENTS

Officially Official: Aspar Switches to Honda RCV1000R, Signs Guy from Owensboro nicky hayden born to ride laguna seca scott jones 635x422

As expected, the Aspar team today announced they would be switching from Aprilia to Honda for the 2014 season in MotoGP. The team has signed a two-year deal with HRC to race the Honda RCV1000R production racer, and will field 2006 world champion Nicky Hayden on one of the bikes.

The reasons behind dropping Aprilia and their highly successful ART machine are simple: after the departure of chief engineer Gigi Dall’Igna, the future of Aprilia’s MotoGP program is in severe doubt. American Honda had lobbied hard to have Hayden back on a Honda, and his signing came with the blessing and support of HRC.

Having a top level rider on the production racer – and one with many years of experience on a factory bike – should help to develop the bike, providing valuable input for HRC. American Honda’s financial contribution in getting Hayden on the bike was also a key factor.

Aspar Decides: Nicky Hayden to Ride a Honda in 2014

10/15/2013 @ 7:20 am, by David Emmett34 COMMENTS

Aspar Decides: Nicky Hayden to Ride a Honda in 2014 Saturday Qatar GP MotoGP Scott Jones 20 635x422

The future of Nicky Hayden appears to have been decided. Jorge Martinez, boss of the Aspar team, has decided to drop Aprilia in favor of Honda, according to German language website Speedweek.com. Aspar is set to make an announcement later this week on its future, and that decision appears to be that the Spanish team will be running Honda’s production racer RCV1000R for next season.

The decision was made almost inevitable once it was announced that current Aprilia racing boss Gigi Dall’Igna would be leaving the Noale factory to join Ducati. Dall’Igna and Martinez had a strong working relationship dating back to the years in which Aspar ran 125 and 250cc team, and Aspar’s faith in Aprilia’s MotoGP program was based on the strength of that relationship.

Video: Casey Stoner Testing the Honda RCV1000R

10/08/2013 @ 4:46 am, by Jensen Beeler12 COMMENTS

Video: Casey Stoner Testing the Honda RCV1000R Casey Stoner HRC test 2014 Honda RCV1000R RC213V 04 635x423

We have already brought you the report of Casey Stoner testing the 2014 Honda RC213V and HRC’s “production racer” machine, the Honda RCV1000R. And, we have already brought you a bevy of photos from that test. Well now, we are bringing you another little video action from Stoner’s recent GP test at the Twin Ring Motegi circuit — just for good measure.

Honda’s V4 Homologation Special Confirmed But Delayed

10/07/2013 @ 4:19 am, by David Emmett42 COMMENTS

Hondas V4 Homologation Special Confirmed But Delayed honda nr750 transparent 635x425

That the Honda CBR1000RR Fireblade is getting a little long in the tooth has been obvious for several years now. And that Honda is planning a very special V4 sportsbike to take the Fireblade’s place on the World Superbike grid has also been broadly mooted for the past couple of years.

The existence of the V4 1000 was first publicly acknowledged by Honda president Takanobu Ito, who spoke openly about the bike at the end of 2012.

Since then, there have been constant rumors that the new Honda superbike was to be introduced at EICMA in Milan this coming November. So persistent had the rumors become that Honda Italia last week was forced to issue a denial, sending out a press release to the Italian media insisting that the bike will not be introduced at the EICMA this November.

26 Hi-Res Photos of Casey Stoner Testing the 2014 Honda RC213V & Honda RCV1000R Production Racer

10/04/2013 @ 12:30 am, by Jensen Beeler20 COMMENTS

26 Hi Res Photos of Casey Stoner Testing the 2014 Honda RC213V & Honda RCV1000R Production Racer Casey Stoner HRC test 2014 Honda RCV1000R RC213V 02 635x423

Here at Asphalt & Rubber, we miss Casey Stoner racing in the MotoGP Championship. That may not be the most popular opinion, especially with MotoGP fans, as the Australian never really warmed up to being in the spotlight, dealing with the prying questions of the press and demands of fans. Casey called things the way he saw it, and always strived for more on the track — and this ruffled many, as they viewed his words as complaints instead of his pursuit of perfection.

As critical of himself as he was of the machinery, tracks, and other riders, Stoner raced on a different level. There is an understanding of motorcycle racing dynamics in the two-time World Champion’s mind that few GP racers can match, and the proof of that is in Stoner’s results. It is this understanding the HRC hopes to tap into whenever they have they Aussie test a machine for them.

Taking to the Twin Ring Circuit in Motegi, for yet another test with Honda, Stoner rode back-to-back an early iteration of the 2014 Honda RC213V as well as the 2014 Honda RCV1000R “production racer” that non-MSMA teams will race next season. We have 26 high-resolution photos of Casey on these bikes after the jump, for your viewing pleasure.

Casey Stoner Tests the Honda RCV1000R Production Racer

10/03/2013 @ 2:39 pm, by David Emmett12 COMMENTS

Casey Stoner Tests the Honda RCV1000R Production Racer Casey Stoner HRC test 2014 Honda RCV1000R RC213V 21 635x423

While the 2013 MotoGP season has been favored with fair weather, Casey Stoner’s testing duties for Honda have been severely hindered by rain.

The previous test was a washout, and most of the last two days at Motegi were also badly affected by rain. However, the Australian managed to cram the better part of two days’ work into a single day on Thursday, riding both the 2014 RC213V and Honda’s production racer, the Honda RCV1000R.

MotoGP: Redding Signs Two-Year Deal with Gresini – Will Ride the 2014 Honda RCV1000R Production Racer

08/29/2013 @ 2:36 pm, by David Emmett5 COMMENTS

MotoGP: Redding Signs Two Year Deal with Gresini   Will Ride the 2014 Honda RCV1000R Production Racer Scott Redding Qatar 2012 Moto2 Scott Jones 635x422 635x422

MotoGP’s worst-kept secret – the latest in a very, very long line of badly-kept secrets – is finally out. As had been widely reported, Gresini Honda finally confirmed that they have signed a two-year deal with Scott Redding to race in MotoGP.

Redding will race the now-named Honda RCV1000R production racer for the 2014 season, with the plan being that Redding will move up to ride the factory RC213V at Gresini the following year.

«