Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

BMW ConnectedRide Could Help Drivers See Motorcyclists

10/15/2012 @ 5:04 pm, by Jensen Beeler12 COMMENTS

If you have ridden motorcycles for any extended period of time, you likely have had a “moment” with an automobile — it happens to every rider. Motorcycles have a small visual profile when viewed from the front and rear, and we move around in our lanes, favoring the sides or the middle, depending on the road and traffic conditions. We change velocities with ease, accelerate much quicker than a car, and in a predominantly four-wheeled society, drivers are conditioned to look for an automobile in their mirrors, not a motorcycle.

I can barely go a week without hearing a story from a fellow motorcyclist about how he or she was cut-off by some “cager” that was either not paying attention, or worse, intentionally out to injure them. The truth is, there is no great car conspiracy to run motorcycles off the road, though some drivers do let their road rage get ahead of them, not realizing that a car is two-ton rolling weapon. A great component to being a seasoned motorcyclist is riding defensively, which includes understanding that lawful riding doesn’t always mean prudent riding.

A large portion of my “near misses” I saw before they even happened. A driver on a phone, a car hugging one side of the line, a gap forming in a lane during traffic, all these things are enticements to a driver to change lanes rapidly and without caution. These conditions should also be signals to a rider to be weary of the four-wheeled vehicle near them, as the burden is on us as motorcyclists to ensure our own safety on the road — we are silly to place that burden on someone else, especially someone within the relative safety an automobile provides.

When I hear these near-miss stories, what I rarely hear are the events that happened 30 seconds before the incident. Did the motorcyclist change lanes? How long had they been behind / next to / in front of the car in question? Did they see the driver in his or her mirror? If so, what were they doing? Sure, when they came over into your lane, nearly running you off the road, they were legally at fault, but you were in the wrong to think they wouldn’t do such an act.

Motorcycles conform to traffic patterns that are different from those used by automobiles. It is entirely possible for an attentive driver to check for a clear lane, and within the time it takes to signal and move lanes, a previously unseen motorcycle can take that space. All the “Look Twice” campaigns in the world cannot overcome the reality that if a motorcyclist puts him or herself in a rightful, but dangerous position, a bad outcome can still occur. But what if cars and motorcycles talked to each other?

Jonathan Rea Talks About The Differences Between The Electronics in MotoGP and World Superbike

10/02/2012 @ 3:31 pm, by David Emmett7 COMMENTS

The chance to substitute in the Repsol Honda team for the injured Casey Stoner was a great opportunity for Jonathan Rea to get a feel for a MotoGP bike and demonstrate his talent and potential, objectives in which he succeeded admirably. But it was also a chance for MotoGP journalists to grill the Ulsterman on the differences between various aspects of MotoGP and World Superbikes, Rea having shown he was both fast enough to feel the difference, smart enough to understand the difference, and articulate enough to explain it to reporters.

At Aragon, the subject turned to electronics, and the difference between the systems used in the two series. The topic was broached as Rea was explaining what had happened to him during the race. He had got caught up cycling through the various electronics strategies the Honda RC213V is equipped with, looking for one that would help him as the tire wore throughout the race. A lack of dry track time getting to understand how the electronics affected the bike as the tires begin to wear left him confused and struggling to find a setting that would work, Rea told reporters.

MotoGP: Riders Give Mixed Reactions to Spec-ECU News

09/27/2012 @ 12:53 pm, by David Emmett3 COMMENTS

With the MotoGP paddock assembled at the Motorland Aragon circuit, the press got their first chance to gauge rider reaction to the proposal of a spec ECU which Dorna is looking to introduce into MotoGP, most probably from 2014. The reaction was guardedly positive among the MotoGP regulars, though all five riders questioned in the pre-event press conference raised concerns over safety. Only Jonathan Rea, standing in for Casey Stoner in the Repsol Honda team for probably the last time, dissented, believing that MotoGP should be a pure prototype series.

“If everyone has the same electronics, this will be positive for everyone, more positive for the ones who do not have the best electronics,” Jorge Lorenzo told the press conference. He was the first to voice safety concerns. “I think we have to try it and to see if we still have the same security on the bike. Because now we avoid a lot of crashes, especially highsides, and maybe with the standard electronics the bike is a bit more dangerous. Because now, the bikes are more powerful, we have more than 250 horsepower, so we have to be careful of these things.”

MotoGP: Magneti Marelli Offering Free Electronics in 2013

09/26/2012 @ 8:35 am, by David Emmett8 COMMENTS

MotoGP has taken its first step towards the formal introduction of a standard ECU. Today, Dorna announced that they have reached agreement with Magneti Marelli to supply an electronics system to MotoGP teams for the next four years, starting from the 2013 season. To support the electronics system, Magneti Marelli will set up a MotoGP R&D center at their base in Bologna, Italy.

The system to be supplied is complete, and highly sophisticated. The system will comprise an ECU, a complete sensor package, data logger and all of the various wires and switches to make the system. The ECU on offer is described as being Magneti Marelli’s “highest technological option”. More importantly, the Italian electronics firm will supply full support for the ECU, both on and off the track, helping teams develop and set up the system. The system will be supplied free of charge to any team that requests it.

The system on offer will be supplied on a voluntary basis for 2013, with the teams free to continue to develop and use their own systems should they so choose. To allow teams to compete with the teams electing to use proprietary systems, the Magneti Marelli system supplied to the teams will be fully functional for the 2013 season. The Magneti Marelli system is the de facto standard in the paddock, with both Yamaha and Ducati already using a very similar system on their factory prototypes.

New Kawasaki Ninja ZX-6R Gets Traction Control for 2013

09/13/2012 @ 11:19 am, by Jensen Beeler7 COMMENTS

Officially debuting the 2013 Kawasaki Ninja ZX-6R in New York’s Times Square today, Kawasaki has unsurprisingly brought a stroked-out 636cc machine to a 599cc supersport battle. While the chassis of the new Kawasaki Ninja ZX-6R is the same, the motor has obviously been reworked, along with the bodywork. However, the big news from the reveal is the addition of Kawasaki’s three-mode KTRC traction control to the supersport-class motorcycle, once again proving that electronics are the new horsepower.

Other additions to the 2013 Kawasaki Ninja ZX-6R include Showa’s new SFF-BP front forks. Combining Showa’s Separate Function Fork (SFF) with its Big Piston (BP) technology, Kawasaki hopes the suspension units will provide the optimal balance between street and track riding. The new Kawasaki Ninja ZX-6R motor also gets further improved with the addition of a back-torque limiting slipper clutch.

Electronics Coming to the MV Agusta F4 in 2013?

06/20/2012 @ 2:27 pm, by Jensen Beeler7 COMMENTS

Ahead of its yearly gathering of MV Agusta enthusiasts (this year marking 60 years of the famous brand), the Italian company’s CEO Giovanni Castiglioni sat down with Moto.it to answer some questions about the state of the company, the upcoming MV Agusta Rivale, and the future MV Agutsa F4. While Castiglioni confirmed the name of the company’s upcoming street-bike-meets-enduro model, perhaps the most interesting insight was the company’s philosophy on the F4 design, and what the next model year could hold for one of the industry’s most iconic motorcycles.

2012 BMW S1000RR – Tweaks Come to the Liter Bike King

10/21/2011 @ 3:07 am, by Jensen Beeler11 COMMENTS

BMW did an amazing thing two years ago. Not really known for its performance street motorcycles, BMW took the competitive superbike market head-on, bringing out a motorcycle that not only had class-leading performance figures, but was also priced extremely competitively against its Japanese competitors. That lethal combination of price, quality, and performance made the BMW S1000RR the sport bike to have over the past two years, and it shows in the S1000RR’s sales figures, which eclipsed every other liter bike.

Not wanting to rest too heavily on its laurels, BMW has updated the S1000RR for the 2012 model year, and while the bike may look the same, the German company hopes it has done plenty to its halo bike to make would-be buyers give the S1000RR a good looking over next season, despite going into its third year of production. While the same 193hp engine resides at the heart of the S1000RR, and the curb weight remains a paltry 449 lbs (90% fuel), the 2012 BMW S1000RR gets a bevy of suspension, chassis, and electronics for the new model year.

“Why Would You Make a Motorcycle that You Can’t Wheelie, but that Wheelies Everywhere?” – Kenny Roberts Sr.

07/27/2011 @ 4:52 pm, by Jensen Beeler10 COMMENTS

On Thursday at the US GP, a day before the general public and non-MotoGP press could get into Laguna Seca, Yamaha unveiled its 50th Anniversary team livery, with a special cadre of legendary Yamaha riders. Eddie Lawson, Kel Carruthers, Kenny Roberts Sr., and Wayne Rainey joined current Yamaha riders Ben Spies, Cal Crutchlow, Colin Edwards, Jorge Lorenzo in the pit lane of the famous American track to commemorate Yamaha’s half-century of motorcycle Grand Prix involvement. After the presentation, a scrum of journalists got a chance to talk to King Kenny about his experience riding the YZR-M1 around Laguna Seca, as Yamaha had built a special GP bike for the American GP Champion, though it did not have a full electronics package.

A&R also got to eavesdrop in on the conversation between Roberts, Edwards, Spies, and Crutchlow, as the foursome exchanged notes on how GP racing has progressed, and what riding the M1 was like coming from different disciplines outside of the usual GP career track. Perhaps most interesting in that discussion was how precise riding a MotoGP motorcycle has become, as the tires, electronics, and suspension all demand a very particular riding style, racing line, and motorcycle setup to achieve maximum performance.

Roberts lamented to the current GP riders because of the precision required, it was easy to run afoul of the M1. Saying in his day, a rider could be 10 feet off the ideal line, fight the bike through the corner, and finish the lap none the slower; but on the current MotoGP equipment, being 10cm off the line can mean seconds missing on the lap time because of how exacting the sport has become.

What MotoGP Racing at Laguna Seca Would Look Like Without Electronic Rider Aids

07/20/2011 @ 12:47 pm, by Jensen Beeler13 COMMENTS

Back when men were men…yada yada yada, and all that. You know, the real interesting thing about watching this footage from 1985 is, well…how interesting the racing is to watch, even with the commentary being in Japanese. Front wheels several feet in the air on acceleration, plenty of rider-on-rider corner stuffing, and the only traction control coming from the rider’s right wrist.

Perhaps making this 26-year-old clip such a keeper is how cool racing at Seca used to be is the recurrent wheelies the riders are popping coming down the corkscrew. Jaws dropped when Valentino Rossi passed Casey Stoner on the inside of the most technical corner on the MotoGP track roster, but the MotoGP paddock would have collectively excreted a brick had he done it on one wheel. Now that’s racing. Thanks for the tip Trent!

Casey Stoner on Developing the Honda RC213V

07/07/2011 @ 10:25 am, by Jensen Beeler11 COMMENTS

Sitting down with Casey Stoner after the Italian GP at Mugello, the HRC media department asked a bevy of questions to the Australian rider. In the interview, Stoner primarily talks about about the upcoming 1,000cc 2012 Honda RC213V and its differences to the current batch of 800cc motorcycles. Stoner also sheds light on his riding style, how he operates during the race weekend to setup his race package, and what he looks for from a motorcycle to fit his riding strengths.

Perhaps the most interesting thing to come from Stoner’s statements is how similar the RC213V is to the RC212V, and his thoughts on over-taking and passing in MotoGP. While the insight is an important one, one should always consider the source, and it doesn’t surprise us that a GP rider would suggest that its an increase in caliber of rider that’s responsible for less passing and overtaking in GP racing. Engineers, for example, might suggest that it’s the electronics packages that have changed the racing. Read the interview after the jump, and leave your thoughts on that subject (or any other) in the comments.