Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

Valentino Rossi to Test New Aluminum Frame at Jerez

09/21/2011 @ 8:57 am, by Jensen Beeler15 COMMENTS

Valentino Rossi to Test New Aluminum Frame at Jerez Valentino Rossi Ducati Corse test 635x423

According to both GPone and MCN, Valentino Rossi and Ducati Corse will test a new aluminum frame at Jerez this week. Though the two MotoGP authorities differ on what sot of frame exactly will be used during the test (MCN says twin-spar, while GPone maintains an “open cradle” frame that leaves the motor still as a stressed object). Regardless of the style, the new chassis is reportedly made by FTR, and is another attempt by the Italian racing team to figure out how to solve the vague front-end feeling coming from the Ducati Desmosedici GP11/GP11.1/GP12.

Possibly similar to the chassis style used by Honda and Yamaha, this new frame design marks the fourth major chassis change this year for Ducati. Unable to compete against the top pack on the grid, Rossi has lately even struggled to keep up with his fellow Ducati riders come race day. While technically considered a test for the 2012 season and on the GP12 motorcycle, the results from the Jerez test (Ducati’s seventh test of an allowed eight) could easily find its way onto this season’s Desmosedici.

Rossi Gets Deliciously Cryptic after GP12 Test at Mugello

09/08/2011 @ 8:04 pm, by Jensen Beeler12 COMMENTS

Rossi Gets Deliciously Cryptic after GP12 Test at Mugello Valentino Rossi Misano Helmet 635x422

After the secrecy concerning Ducati Corse’s test of the Ducati Desmosedici GP12 at Mugello this week, we were surprised to see that the Italian racing team even bothered to submit a press release for the event, which saw both Franco Battaini and Valentino Rossi take laps on a new version of the GP12. Speculated to have an aluminum twin-spar chassis (courtesy of FTR), the photos from the event do suggest a change in the chassis design, though what is actually under the fairings will be debated heavily over the rest of the week.

Making no mention of an aluminum chassis, improved front-end feel, or improved lap times, the statements (press release after the jump) from Ducati Corse and Valentino Rossi are incredibly vague, though perhaps they leave some interesting things to be read between the lines.

The fact that Rossi tersely described the test results without mentioning any improvements to the Desmosedici’s front-end is an interesting point to consider, especially after the nine-time World Champion had a crash on his third lap, binning the GP12 in the exit of the Scarperia-Palagio section of the Mugello track.

Considering that the feel from the GP11/11.1 has been the center-point throughout the 2011 season, we would have expected some indication on how the “good fight” was been waged in the Corse camp. Though spartan in  his words, one can discern some meaty notions from what Rossi didn’t say in his statement after riding 82 laps on the new GP12. Check the press release out after the jump, and leave your conclusions in the comments.

Ducati Desmosedici GP12 “EVO” Testing at Mugello

09/08/2011 @ 9:06 am, by Jensen Beeler25 COMMENTS

Ducati Desmosedici GP12 EVO Testing at Mugello Ducati Desmosedici GP12 EVO Mugello 1 635x373

Testing at Mugello today and tomorrow, Ducati has very discretely (like that could actually happen) begun testing its Desmosedici GP12 “EVO” – a modified version of the GP12 that features an aluminum frame made by FTR. Replacing Ducati’s innovative carbon fiber “frameless” chassis, the twin-spar aluminum frame is an attempt by the Italian factory to bring more front-end feel to its riders (read David Emmett’s analysis of the Desmosedici’s troubles here). Testing today with Franco Battaini, we get these first photos of the Desmosedici GP12 “EVO” (or is it GP12.1?) testing at the Italian track.

Photo: 2012 Ducati Superbike 1199’s Headlights

06/27/2011 @ 3:42 pm, by Jensen Beeler16 COMMENTS

Photo: 2012 Ducati Superbike 1199s Headlights 2012 Ducati Superbike 1199 motociclismo

Motociclismo.it continues to be Ducati’s favorite channel to leak teasers of its upcoming Superbike, the 2012 Ducati Superbike 1199. Promising to be a revolutionary design for the Italian brand, we know already that the bike will shed roughly 20 lbs from the 1198 model, while adding 20hp to its peak horsepower figure. This astonishing power increase comes from the “Superquadrata” v-twin motor, which features an overly-square cylinder design, that should rev to peaky power delivery delight (if you’re into that sort of thing).

From this latest photo we see that the new 1199 (we’ve been enjoying the rumors that the new Superbike would be called the Xtreme) borrows from the 916’s squinty highlight design, while adding the 1098/1198’s more pronounced air intake structure. The Ducati Superbike 1199 will be fed that healthy dose of oxygen through a stressed aluminum airbox/headtube design, à la its MotoGP frameless technology, and for which we’ve already seen patents of the design.

MotoGP: Ducati Racing with 2012 Chassis Starting at Assen

06/20/2011 @ 6:38 pm, by Jensen Beeler20 COMMENTS

MotoGP: Ducati Racing with 2012 Chassis Starting at Assen Valentino Rossi GP12 Development 635x511

Ducati Corse continues to battle a war on two-fronts: both by trying to market itself out of an otherwise disastorous MotoGP season, and also to rapidly develop and search for answers to the lackluster Ducati Desmosedici GP11. The latest news out of Bologna now leans more towards this latter effort (or is it the prior?), as Ducati Corse has announced that it will bring a version of its 2012 chassis to Assen for Valentino Rossi to use in the Dutch TT.

The Ducati Desmosedici GP11.1, as they’re calling it, features a modified motor, and will debut Ducati’s next-generation gearbox: the Ducati Seamless Transmission (DST). Ducati hopes bringing out the new chassis, which has already been given the nod by both Rossi and teammate Nicky Hayden, will not only help turn around the season’s results, but also expedite development for the Ducati Desmosedici GP12. Along with a new carbon chassis, the GP11.1 features an inverted swingarm design, which sees the rear shock mounted higher-up with a special rear-subframe assembly.

Rossi Tests the Ducati Desmosedici GP12 at Mugello

05/26/2011 @ 1:10 pm, by Jensen Beeler7 COMMENTS

Rossi Tests the Ducati Desmosedici GP12 at Mugello Valentino Rossi Ducati Corse GP12 Mugello test 1 635x434

Under normal circumstances, Valentino Rossi testing the Ducati Desmosedici GP12 at the Mugello circuit would be a big deal on the interwebs. But today with the combination of a “been there, done that” effect that setting in around the GP12, and the news that the new 2012 Ducati “Superquadrata” Superbike is also being tested at the fabled Italian track, Rossi’s latest outing on the 1,000cc class bike is taking a backseat. That’s not say we don’t want to show The Doctor some love, as Ducati Corse has eight more photos showing off details of the GP12.

Though not a big technical detail, one of the new things we spotted from the photos was the gravel guard on the exhaust pipe near the right foot, which matches the guard we’re accustomed to seeing on the GP11’s tail. The big question regarding the GP12 though is its cylinder dimensions, with Nicky Hayden recently quoted as saying he could talk about anything regarding the GP12, except its motor displacement. Interesting, no? Photos after the jump.

First Shots: Nicky Hayden on the Ducati Desmosedici GP12

04/09/2011 @ 11:17 am, by Jensen Beeler2 COMMENTS

First Shots: Nicky Hayden on the Ducati Desmosedici GP12 Nicky Hayden Ducati Desmosedici GP12 635x414

To considerably less fanfare, Nicky Hayden took the Ducati Desmosedici GP12 today at Jerez, which for MotoGP fans means more photos of Ducati’s 1,000cc class prototype motorcycle. Ducati didn’t make a video of Nicky’s adventures on the GP12, but the race team got some valuable input from the American racer, who put in 61 laps for Ducati Corse once the circuit dried from high humidity. “When I woke up this morning, the sky was really gray and the track was completely wet,” said Nicky Hayden. “I was pretty disappointed. I didn’t think we’d be able to do anything because it wouldn’t have made sense to waste a day testing in those conditions.”

“The situation got better and better though, and after lunch, I was able to put on my leathers. I couldn’t wait to ride, and it was worth the wait. It’s an honor to be able to participate in the first track test of the GP12 because it doesn’t happen very often that you get to ride a bike on the track for the first time: it’s a special feeling. Everything went well, and we didn’t have a single problem: the motor is really nice to use, and I had a lot of fun riding the bike. I hope I gave some useful feedback to Filippo and the boys. I know they’ll be working on this bike while we go back to focusing on the next race, because this season just started.”

First Shots: Rossi Rides the Ducati Desmosedici GP12

04/08/2011 @ 11:09 am, by Jensen Beeler15 COMMENTS

First Shots: Rossi Rides the Ducati Desmosedici GP12 valentino ross ducati desmosedici gp12 4 635x423

Under some sunny and warm skies at Jerez, Valentino Rossi got to meet the Desmosedici GP12 for the first time today. In total Rossi slagged the GP12 across the Andalusian circuit for a total of 50 laps saying, and was seemingly pleased the the new machine.

“I’m happy,” said Valentino Rossi after the test. “I like the GP12. In my opinion, it’s more enjoyable, more fun to ride. It was the first time we had it on the track, so we had some work to do, but the engine is nicer. It’s a lot of fun, and you can do some nice slides. It’s the bike we’ll ride next year, so it was very important—and also very nice—to be among the first to take it on the track.” Photos, video, and more are awaiting you after the jump.

Valentino Rossi Will Test the Ducati Desmosedici GP12 Tomorrow – Nicky Hayden Will Test on Saturday

04/07/2011 @ 7:01 pm, by Jensen Beeler1 COMMENT

Valentino Rossi Will Test the Ducati Desmosedici GP12 Tomorrow   Nicky Hayden Will Test on Saturday Ducati Corse Valentino Rossi 635x422

After a day of successful testing at Jerez with Franco Battaini and Vittoriano Guareschi on the GP12, official word has come down from Ducati Corse high command that Valentino Rossi and Nicky Hayden will swing a leg over the new 1,000cc machine tomorrow and Saturday, respectively. Valentino Rossi has presumably already made the trek back to Spain this evening, and will test the Ducati Desmosedici GP12 tomorrow, while Nicky Hayden will return his press junkets from Germany, and have his turn on the GP12 this Saturday.

MotoGP: Here Come the 1,000’s

04/04/2011 @ 1:57 pm, by Jensen Beeler5 COMMENTS

MotoGP: Here Come the 1,000s Rossi Ducati Corse Pit Box 635x390

For the 2012 season, MotoGP will be reverting back to its 1,000cc format (actually, it used to be 990cc, but what’s ten cubic centimeters among friends?). While many MotoGP fans have been awaiting the day that the “big bikes” would return to premier racing with their powersliding, rider chewing, wheelie popping ways, it’s hard to get excited when the first two races of the last 800cc season have been so eventful. Nevertheless the die has been cast, and this week should be begin our first glimpse into these two-wheeled monsters.

«