Brad’s Leggero by Walt Siegl

The latest creation from Walt Siegl Motorcycles, Brad’s Leggero helps fill the void left behind by the departure of the Ducati Sport Classic from the Italian company’s lineup. Speaking to those who long for simpler machines, at the core of the Leggero is an air-cooled two-valve Ducati engine, which was built and blueprinted by Bruce Meyers Performance. Helping complete the café racer look is the bullet fairing bodywork, which takes a dash of modern by being made of Kevlar. The modern touches continue, with the use Öhlins suspension and radially mounted Brembo brakes. The effect is a tastefully done café racer that not only shines with real craftsmanship, but also does post-heritage right: taking the best of design from the past, without snubbing the progress of technology in the future.

More Photos of the 2017 Yamaha YZF-R6

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida. Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update. With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it. We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

2017 Yamaha YZF-R6 Gets ABS, Traction Control, & More

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines. On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same. However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter. While more of a model refresh, than an all-new model, Yamaha has gone to great lengths to improve upon a machine that is already leading the supersport category.

HJC Is Coming Out with Star Wars Themed Helmets

Pardon me while I geek out, just a little bit. It looks like HJC has gotten the rights to make Star Wars themed helmets for their 2017 collection. Right now, HJC is showing two helmets, one that mimic’s Kylo Ren’s helmet in The Force Awakens, and the other that replicates Boba Fett’s iconic lid. Both of these themed helmets are based off the HJC RPHA 11 helmet, the company’s top-of-the-line helmet, which also serves as a platform for HJC’s other branded, tribute, and special edition helmets. There will also be a “Death Trooper” helmet, based on the HJC FG-17 helmet, that will debut in time to milk interest from the opening of Rogue One. It should be noted that rumors about a possible Princess Lela helmet, with side-mounted hair buns, are unfounded and possibly started by this publication.

2017 Aprilia Tuono V4 1100 Factory – Just Add Öhlins

It goes without saying that if the 2017 Aprilia Tuono V4 1100 is getting a list of updates at INTERMOT, then the same must be true for the Factory version of the potent 175hp streetfighter. This means that the 2017 Aprilia Tuono V4 1100 Factory takes the new fourth-generation APRC electronics package, Bosch-powered cornering ABS, improved combustion chamber, larger exhaust can, and adds to it the typical Factory-spec improvements like Öhlins suspension (including an Öhlins steering damper). If you haven’t ridden the Aprilia Tuono V4 1100 RR or Factory, we highly recommend it – they’re so choice. The Aprilia Tuono V4 1100 easily competes as one of our favorite motorcycles at Asphalt & Rubber.

2017 Yamaha MT-10 SP – Putting the Europeans on Notice

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today. This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended. The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models. To do this, Yamaha has added semi-active suspension, courtesy of Öhlins. A quickshifter has also been added, along with an assist & slipper clutch.

The Yamaha MT-09 Gets a Facelift & More for 2017

Yamaha’s MT line runs with the tagline “The Dark Side of Japan” and promises edgy and affordable street bikes for urban riders. Someone in Iwata, Japan must have thought that the current Yamaha MT-09 wasn’t quite edgy enough though, which is the only way we can explain the 2017 Yamaha MT-09, which debuted today at the INTERMOT show in Cologne, Germany. Now with a “twin-eyed” LED headlight design, the Yamaha MT-09 feels a little bit more at home when parked next to the Yamaha MT-10 / Yamaha FZ-10 streetfighter. Other changes include an assist/slipper clutch, quickshifter, new suspension, and a redesigned tail section and fender.

Honda CBR1000RR SP2 – Big Red’s New Racing Platform

The current state of the World Superbike Championship rules entirely encourage the adoption once again of “homologation specials” – production bikes whose sole purpose is to be used on the race track. While none of the manufacturers have adopted a radical approach with their homologation special designs, this year’s INTERMOT show has already seen several such machines introduced, the Kawasaki Ninja ZX-10RR, the Suzuki GSX-R1000R, and the Honda CBR1000RR SP2. For Honda, the differences between the SP and SP2 aren’t terribly radical, but they are more purposeful. The 2017 Honda CBR1000RR SP2 does come with several visual cues that are different from the CBR1000RR SP model: carbon insert panels, gold striping on the tri-color paint scheme, and the more obvious Marchesini wheels.

2017 Ducati SuperSport – The Sport Bike Returns

The Ducati SuperSport is back for the 2017 model year, bringing a street-focused sport bike into Ducati’s motorcycle lineup once again. As you would expect, the 2017 Ducati SuperSport will come in two models, the SuperSport base model and a higher-spec SuperSport S model. Both bikes use the 937cc, water-cooled, 113hp v-twin engine that’s found in the Ducati Hypermotard 939. Ducati has also used a steel trellis frame for the SuperSport, which looks very similar to the one used on the current Monster line. Obviously, the front fairing takes some cues from the Panigale superbike. Ducati’s focus is for the SuperSport to augment its street lineup with something sporty that could go on the race track, but would be more at home on twisty roads, even with a passenger on the back.

2017 Honda CBR1000RR SP – Proving Patience is a Virtue

The wait is over. The most anticipated motorcycle of the INTERMOT show is here, the 2017 Honda CBR1000RR SP. We have seen the spy photos of this new superbike, we have seen leaked details on this superbike, and we’ve mused endlessly about this new superbike. And now, we can finally replace that conjecture with fact. First off, the rumors were true. The 2017 Honda CBR1000RR SP sheds a massive 15 kilograms off its bulk, which translates into a 441 lbs mass at the curb. Power has also been increased by almost 11hp, for a total of 190hp at the crank. Honda says that these two figures combined mean a 14% increase in the Honda CBR1000RR’s power-to-weight ratio. That’s pretty astounding, when you consider that under the new fairings is still mostly last year’s bike.

Only 8 Ducati Desmosedicis Left in the US

04/12/2010 @ 5:43 pm, by Jensen Beeler5 COMMENTS

Finishing the end of a limited-production run of 1,500 motorcycles, only eight Ducati Desmosedici RR motorcycles remain in the United States as Pro Italia of Glendale, CA just took delivery of the last Desmo that will hit US shores from Bologna. The venerable GP replica that a common man can own made quite a stir when it was announced, and speculation has already begun about a successor for the RR. Will the next incarnation (if there is one) be an 800cc version? Or well Corsa Rosa wait for MotoGP’s switch back to 1000cc’s?

Desmosedici RR: Does It Wheelie?

10/26/2009 @ 12:31 pm, by Jensen Beeler10 COMMENTS


The answer? Yes, yes it does. SuperBike Magazine recently got their hands on a Desmosedici RR, and enlisted the help of Dave Sonsky (Super Streetbike Magazine) to see if the $72,000 motorcycle could get a wheel in the air like its race-only brothers. Photos and more after the jump.

Desmosedici RR Tail-Guard Recall

09/30/2009 @ 4:44 pm, by Jensen Beeler1 COMMENT


Desmosedici RR owners will be happy to hear that their GP replica bikes are being recalled yet again. This time at fault is the spacing between the tail-guard and exhaust system. Because of their close proximity, the tail-guard could possibly overheat, and become a fire hazard.

The 4 Million Dollar Ducati Track Day

07/01/2009 @ 7:49 pm, by Jensen Beeler3 COMMENTS


Donington Park recently played host to 45 Ducati Desmosedici RR owners, as they spent an exclusive track day courtesy of Ducati UK. The video of the bikes starting their session is after the jump, but we’re trying to decide what’s more impressive: the sound the bikes make as they leave, or the fact there’s nearly $4 million of machinery going by without an umbrella girl in sight.

Ducati Desmosedici Documentary Video, Part 5

06/10/2009 @ 5:52 pm, by Jensen BeelerComments Off on Ducati Desmosedici Documentary Video, Part 5


In the fifth installment of Ducati’s documentary on the Desmosedici, we now turn our attention to how the Desmosedici went from MotoGP race bike, to slightly more well-mannered street bike. If you’re late to the DesmoDoco series, you can find Part 1Part 2Part 3, & Part 4, right here at A&R.

Ducati Desmosedici Documentary Video, Part 4

05/28/2009 @ 12:38 am, by Jensen Beeler1 COMMENT


In this fourth installment of Ducati’s documentary on the Desmosedici, we focus on the the RR’s special Bridgeston BT-01 tires, which were specifically built with the Desmosedici in mind. The BT-01’s are the stickiest OEM tire Bridgestone has ever made, and is basically a MotoGP slick with tread to meet DOT standards. If you’re late to the DesmoDoco series, you can find Part 1Part 2, & Part 3, right here at A&R.

Ducati 989R Desmofighter by Oberdan Bezzi

05/27/2009 @ 1:54 am, by Jensen Beeler1 COMMENT

Last week, we leaked the fact that the Ducati Streetfigther has begun to arrive at US dealers, who are obliged to keep the bike under wraps until its official unveiling. The Streetfighter might be the most anticipated bike this summer, with the Bologna factory finally bringing a naked version of its 1098 Superbike.

Oberdan Bezzi, taking the next logical step in Ducati’s progression, has put pen to paper on what a Desmosedici based streetfighter might look like. The result is menacing, but we’ll wait for the carbon frame version.

Ducati Desmosedici Documentary Video, Part 3

05/11/2009 @ 9:57 am, by Jensen BeelerComments Off on Ducati Desmosedici Documentary Video, Part 3


In this third installment of Ducati’s documentary on the Desmosedici, we focus on the the RR’s carbon fiber panels and body. In particular, Ducati explains the construction beind the all-carbon tail on the bike, and the advantages it gives the rider and the bike. If you’re late to the DesmoDoco series, you can find Part 1 & Part 2 right here at A&R.

Ducati Desmosedici Documentary Video, Part 2

04/27/2009 @ 9:31 am, by Jensen BeelerComments Off on Ducati Desmosedici Documentary Video, Part 2


Ducati has released the second part of a multipart documentary on the design and development of the Desmosedici RR. While the first video was a little content light, this next installment should delight the engineering inclined. Those with a social sciences degree we suggest noding, as if you understand what the hell is going on. We sure did. Watch the video (broken into 3 smaller parts) after the jump.


Ducati Desmosedici Documentary Video, Part 1

04/04/2009 @ 7:55 pm, by Jensen BeelerComments Off on Ducati Desmosedici Documentary Video, Part 1


Ducati has released the first part of a multipart documentary on the design and development of the Desmosedici RR. This first episode is light on content, but heavy on quick edits, and video effects. The start of this video series seems to be timed well with Aprilia’s release of further information on the RSV4. Coincidence? Perhaps. The less than usual spit and polish on the series so far would seem to suggest time, not quality, was the issue at stake here. Watch the video after the jump.