Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

The Frog FZ750 Rana Heads to SFMOMA

03/20/2012 @ 11:22 am, by Jensen Beeler16 COMMENTS

Frog Design is better known for its work designing computer cases for Apple, but  in 1985 Frog Design’s Founder Hartmut Esslinger designed the Frog FZ750. A two-wheeled concept vehicle that was a Yamaha FZ750 underneath the skin, the Frog FZ750 actually helped give birth to the venerable Honda Hurricane.

Conceived just a few years after Frog Design opened its California office, the now iconic Frog FZ750 was a reaction to increasing pressure for safer motorcycles (the Yamaha FZ750 was outlawed in the Golden State at the time), and set the standard for a generation of motorcycle design to come.

Call Your Mother Because Here is the Ultimate Ducati 1199 Panigale Photo Gallery

02/17/2012 @ 3:42 pm, by Jensen Beeler28 COMMENTS

Ducati has been hogging the news the past few weeks, thanks in large part to the debut of the most important motorcycle the Italian motorcycle manufacturer has ever released. With Ducati up for sale and being valued at €1 billion, the Ducati 1199 Panigale sets the record straight that Bologna has not strayed from its sport bike and racing heritage with the release of bikes like the Hypermotard, Multistrada 1200, and Diavel. With Ducati hosting the Panigale’s international press launch in Abu Dhabi at the Yas Marina Circuit (click here to let Ducati know that you wish A&R had been invited to this launch), the initial reports from the assembled press is that all the concerns about Ducati, its frameless chassis design, and its future can be laid to rest.

With a hybrid chain/gear-driven camshaft, titanium valves, a wet slipper clutch, a ride-by-wire throttle, rider-selectable “riding mode” system, and 15,000 mile major service intervals, the Superquadro v-twin motor alone is a major step for Ducati with its Superbike engine design. And, if you add in the first full-LED headlight on a produciton motorcycle, the first electronically-adjustable suspension on a sport bike, the first motorcycle engine braking control system, as well as the first GPS-assisted data acquisition system for a production motorcycle, the total package of the 1199 redefines the word “superbike” and takes the next logical technological step forward in this market segment…and we’ve got over 160 images of the Ducati 1199 Panigale waiting for you after the jump.

Brammo Empulse Spotted “Testing” Six-Speed Gearbox

01/03/2012 @ 4:03 pm, by Jensen Beeler38 COMMENTS

Teased, delayed, and dismayed, fans of the Empulse should be able finally to get their hands on the Brammo Empulse in 2012, as the Oregonian company has been busy finalizing the Empulse’s design and technical specifications for its street bike release. Rumored to incorporate the six-speed SMRE-designed integrated electric transmission (IET) found on the Brammo Engage and Brammo Encite, a video has cropped-up that shows a test mule Brammo Empulse with the IET gearbox fitted to it. Naturally one of the testing requirements is a fat parking lot burnout.

Ducati Supersport Concept by Luca Bar

07/15/2011 @ 11:41 am, by Jensen Beeler11 COMMENTS

Tracing back to when Ducati made the SS line, Luca Bar has put pen to pad again, rendering a modern-day version of the Ducati Supersport. Envisioning a motorcycle based off Ducati’s popular Monster 1100 EVO platform, the Supersport would feature the same 1,078cc air-cooled two-valve v-twin motor of the Monster, which should provide plenty of power and take some design cues from the top-spec naked bike. Bar also points out that using the Monster as the basis for the Supersport could help keep costs down as well, and keep the MSRP close to the Monster 1100 EVO (we’d imagine pricing would have the SS as slightly pricier than the Monster).

Video: The Design of the Husqvarna 900

06/15/2011 @ 5:23 pm, by Jensen Beeler8 COMMENTS

Along with the “don’t call them spy shost” photos that Husqvarna released yesterday, the Swedish brand owned by a German company that’s based in Italy has also released a video that elaborates on the design of the new Husqvarna 900 street bike. As we’ve seen already from the concept sketches, and affirmed in the photos, the new street-going Husky is a super-sized supermotard that features BMW’s F800 series parallel twin motor, albeit slightly revised to 900cc. Find the design philosophy of the new Husqvarna 900 according to Head of Husqvarna Design Raffaele Zaccagnini after the jump.

Kiska Helps Decorate the 2012 KTM SX Bikes

05/31/2011 @ 3:01 pm, by Jensen Beeler2 COMMENTS

Out of all of the industrial design firms that dabble in the motorcycle industry, it has to be the angularly inclined folks at Kiska who we admire the most. Responsible for more than their fair share of “Ready to Race” motorcycles and cars, the Austrian firm has brought us favorites like the KTM RC8 Superbike, KTM Crossbow track car, and the recently debuted KTM 125 Duke street bike.

Helping KTM spruce up its 2012 line of dirt machines, we’re digging the chrome on white color scheme…and we’re not even dirt bike guys. To describe the work in the words of Paris Hilton: “that’s hot” and you can check out more of the 2012 after the jump.

Moto Morini Corsaro Veloce by Luca Bar

04/26/2011 @ 2:06 pm, by Jensen Beeler5 COMMENTS

In case you haven’t notice, we really like the work of Luca Bar. The young Italian designer has an eye for motorcycles we like to own, so it seemed fitting that we show off one of Bar-Design’s older works, the Moto Morini Corsaro Veloce.

With the fabled Italian company set to go up on the auction block again this summer, we thought perhaps some inspiration from Maestro Bar would help pull some buyers out of the woodwork. At the very least, it’s an excuse to show off some more drool-worthy motorcycle eyecandy.

Primer: The Ducati Diavel

03/03/2011 @ 1:25 pm, by Jensen Beeler6 COMMENTS

Tomorrow Asphalt & Rubber must make the trek down from perfect Northern California, to SoCal and the pits of Los Angeles, where dreams go to die. As we descend down through the lower rings of Dante’s ladder and into hell that is the perpetually sunny and warm Los Angeles, our final destination will in fact bring us face-to-face with The Devil himself. Riding the latest creation from Bologna, the American motorcycle press will get its first chance at the highly anticipated Ducati Diavel.

Since we’ll be bringing you live coverage from the event, and writing a few pieces on Ducati’s stab at the performance cruiser segment throughout the rest of the week, we thought it best to start with a primer on the motorcycle. Find after the jump the 2011 Ducati Diavel‘s technical specs, photographs, and design synthesis, and features.

2012 Honda Goldwing Gets Minor Tweaks

02/21/2011 @ 2:27 pm, by Jensen Beeler9 COMMENTS

There must be a new rule in the tourer market segment where “all new bikes” consist of minor revisions to existing machines, as Honda has apparently taken a page out of Harley-Davidson’s playbook, and done an exciting upgrade to the 2012 Honda Goldwing. While rumors were overly-hyped that an all-new Goldwing would be making an American appearance, it appears instead that the Honda engineers have gone on to further improve upon their design of the legendary touring motorcycle.

No longer built in America at Honda’s now defunct Marysville, Ohio plant, the Japanese produced 2012 Honda Goldwing comes with a slightly larger price tag, but boasts some improvements to justify the cost. Revamped bodywork, larger capacity luggage pieces, improved built-in GPS with iPod/MP3 player support, and revised suspension complete the changes for the new Goldwing. It’s hard to impress sport bike guys with a big bike like the Honda Goldwing, but if you’re interested in buying the gold standard (no pun intended) of motorcycle touring, things just got a bit more appealing we imagine.

Motorcycle Lust: KTM/Vyrus Frankenbike

02/19/2011 @ 4:55 pm, by Jensen Beeler10 COMMENTS

This has to be the most impractical motorcycle ever conceived…but we absolutely have to have one. A mixture of the KTM Dakar 450 & KTM Freeride concept, and the Vyrus 987 C3 4V, this Frankenbike not only grabs our attention for its outrageous design, but for its handy work in Photoshop as well. You’d think with the combined forces of KTM‘s proven Dakar winner, Ducati’s stout 1198cc v-twin power plant, and Vyrus‘ hub-center steering chassis design, this would be the last word on all things two wheeled, but as its creator points out, that’s likely not to be the case.